CamaroZ28.Com Message Board

N2O Tech Discussion for the use of Nitrous Oxide

Wiring Question

Thread Tools
 
Search this Thread
 
Old 04-02-2009, 09:15 AM
  #1  
Registered User
Thread Starter
 
ShownomercyZ28's Avatar
 
Join Date: May 2008
Posts: 232
Wiring Question


Coming off the window switch, the tach and TPS wire, on a 95 LT1 where do I tap into for them?

Also, if I am not running a crane ignition box, I just leave that prong empty correct?
ShownomercyZ28 is offline  
Reply
Old 06-04-2009, 06:46 PM
  #2  
Registered User
Thread Starter
 
ShownomercyZ28's Avatar
 
Join Date: May 2008
Posts: 232
No one?

I looked online and I got a few different answers, but nothing solid.

The blue/green wires, where do I hook em too?
ShownomercyZ28 is offline  
Reply
Old 06-05-2009, 07:08 PM
  #3  
Registered User
 
slowride94z's Avatar
 
Join Date: Aug 2007
Location: Bennett N.C.
Posts: 746
I think, the green wire is for an aftermarket tack




the blue wire I have mine hooked to a Burgess switch that activates by the throttle at wide open throttle, not the tps
slowride94z is offline  
Reply
Old 07-22-2009, 12:23 PM
  #4  
Registered User
 
jeremyw2585's Avatar
 
Join Date: Jan 2008
Posts: 17
Originally Posted by slowride94z
I think, the green wire is for an aftermarket tack
I know this is an old post, but this is incorrect. The green wire is a tach input from the pcm. This is how the window switch reads your rpm.
jeremyw2585 is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1989 camaro problems
linz
3rd Gen / L98 Engine Tech
1
10-22-2015 07:59 AM
97 V8-6SP into a 94 Z28? what to expect?
cmdeshon
LT1 Based Engine Tech
2
01-04-2015 11:15 AM
Wiring the CSI, quick questions, i've read the archives...
lbrowne
LT1 Based Engine Tech
25
11-13-2011 04:25 PM
*excellent info* 93 specific info list.
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 05:00 PM
Question about Neons
Matt-01-SS
Car Audio and Electronics
9
08-02-2002 04:05 PM
Back to Subforum
N2O Tech
View Next Unread
Not sure where to put the NX nozzle




Advanced Search
Quick Reply: Wiring Question


Reply Closed Thread Share

All times are GMT -5. The time now is 07:27 AM.