N2O Tech Discussion for the use of Nitrous Oxide

what do i need

Old 08-16-2008, 12:41 AM
  #1  
Registered User
Thread Starter
 
mr.green's Avatar
 
Join Date: Jul 2008
Location: Harrisburg IL
Posts: 117
what do i need

im wanting to put a 75-100 shot on my car with this low of a shot (probably 75) would i need to pull timing?? and what would i need besides the kit, to do this?...safety stuff too? if i need it ....thanks
mr.green is offline  
Old 08-21-2008, 08:02 PM
  #2  
Registered User
Thread Starter
 
mr.green's Avatar
 
Join Date: Jul 2008
Location: Harrisburg IL
Posts: 117
anyone???
mr.green is offline  
Old 08-28-2008, 10:27 PM
  #3  
Registered User
 
SpeedZ28's Avatar
 
Join Date: Feb 2008
Location: Tampa
Posts: 78
You should read the stickys at the top of this thread, they explain quite a bit. The more safty devices you use the better obviously, just depends on how much money you have. As far as pulling the timing, it really depends on the brand kit you have on what they recommend but the overall rule of thumb seems to be that you should do 1 degree for every 50 hp shot. Zex seems to say that you only need to retard if you are using a mod chip or have a performance flash, so like I said, decide on a kit and then read there instructions and that should give you your answer. Good luck.
SpeedZ28 is offline  


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:16 AM.