Is it supposed to be like this?
10-02-2004, 12:13 PM
#1
Registered User
Thread Starter
Join Date: Jun 2000
Location: Zanesville, Ohio
Posts: 217
Is it supposed to be like this?
I have a 97 SS. In between my EVAP canister purge solenoid valve and the line that runs back to the evap canister I have a little black box (with a round face) with an electrical connector in it that also has a vacuum hose on the bottom with a 90 degree turn in it heading to the back of the car. I could not find it on shoebox's web site (I think he has a 95). The thing is the vacuum hose (I think its a vacuum hose) is open, not connected to anything. Is it supposed to be like that? I cant find any hoses that look like they should go to it, nor can I find it in my manual - Thanks
10-02-2004, 01:33 PM
#2
Registered User
Join Date: Dec 1969
Location: Little Rock, AR
Posts: 27,709
Re: Is it supposed to be like this?
Item #26 in the Drawings/Exploded Views section. It's just a vent hose (#15). Nothing is connected to it. The round thing (#11) is a vacuum switch to monitor the performance of the EVAP system.
Thread
Thread Starter
Forum
Replies
Last Post
350350
Fuel and Ignition
14
08-11-2015 12:03 PM
C4m4roJoe
General 1967-2002 F-Body Tech
6
07-19-2015 10:59 PM
guruerror
General 1967-2002 F-Body Tech
6
06-09-2015 07:41 AM