camarochice92

I recently had an egine swap done, from a V8 to an LT1. I am still using the stock 92 gauge cluster. We tried hooking up the wires to get the speedometer to work, but its just not happening. All of the wiring seems to be matching up with the diagrams we have. Is there something else that needs to be done other than just hook up the wires ? Any help would be appreciated. Thanks !

camarochice92

Anybody have any ideas ?????

LilJayV10

www.thirdgen.org

go to the engine swap section, this swap has been done about 1,000 times.

Birdman7389

or send a PM to "zepher" on here...he has done the swap a few times too

camarochice92

Ok I will do both of those. Thanks so much !