Burn_Out

I have a bad oil leak on my driver side valve cover and was wondering how hard of a job that is to change the gasket out, thanks.

94 CAMRO Z28

Valve covers are easy, especially the drivers side. Probably about 10-15min. job your first time around, once you done it before you could pull it, install the new gasket, and bolt it back down probably within 5min. The gaskets on the valve covers and just a rubber/foam that pops into a recess within the cover, so its not hard at all. As simple as unscrewing four bolts. Hope this helps.

Aaron

shoebox

Not sure if I had to, but it seems like I remember removing the AIR diverter from the exhaust manifold to get the cover off. It can be troublesome if it is stuck. Definite anti-seize used when putting it back on.

1loudz

Someone having a 428 r.w.h.p. car and not being able to change the valve cover gasket, is just not right!

94 CAMRO Z28

Hey how much are you looking to get for your car?

Aaron

GeneralZ

It took me longer to find the right socket than it did to change my both my gaskets.

SVT Killer LV

easy s#it man.. do it yourself... you have over 400 rwhp and you need somebody to do that? something doesn't add

blown383

I'd charge you a slice of pizza and a can of coke.

-B