Remove AIR from 1999 Z28
04-11-2014, 05:10 PM
#1
Registered User
Thread Starter
Join Date: Feb 2011
Posts: 12
Remove AIR from 1999 Z28
I recently removed the Air Hose from my 99 Z28 and Installed some block off plates on the headers. I got the hosing removed from behind the intake manifold but now I'm not sure how to remove the air pump. I tried searching but all I can find is info on LT1 Cars not LS1. So anybody know to remove the AIR Pump and everything so I can get it out of the car?
04-12-2014, 08:18 AM
#2
Administrator
Join Date: Nov 1998
Location: Hell was full so they sent me to NJ
Posts: 70,646
Re: Remove AIR from 1999 Z28
Don't have an LS1, but have the 1998 and 2000 factory manuals. They both show the same system, and indicate the AIR pump is bolted to a bracket on the drivers side front frame rail. Instructions appear fairly simple:
1 - Raise vehicle
2 - Remove driver's side lower closeout panel
3 - Remove hoses from pump
4 - Disconnect electrical connector from pump
5 - Disconnect electrical connector from bleed valve solenoid
6 - Remove 3 AIR pump bolts from mounting bracket
7 - Remove AIR pump.
Did you remove the AIR pump shutoff valve?
1 - Raise vehicle
2 - Remove driver's side lower closeout panel
3 - Remove hoses from pump
4 - Disconnect electrical connector from pump
5 - Disconnect electrical connector from bleed valve solenoid
6 - Remove 3 AIR pump bolts from mounting bracket
7 - Remove AIR pump.
Did you remove the AIR pump shutoff valve?
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
08-23-2023 11:19 PM
95chwagon
Parts For Sale
4
01-13-2015 09:19 PM
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 05:00 PM