CamaroZ28.Com Message Board

CamaroZ28.Com Message Board (http://www.camaroz28.com/forums/)
-   General 1967-2002 F-Body Tech (http://www.camaroz28.com/forums/general-1967-2002-f-body-tech-46/)
-   -   Drivers seat belt buckle continuity test for Air Bag Module (http://www.camaroz28.com/forums/general-1967-2002-f-body-tech-46/drivers-seat-belt-buckle-continuity-test-air-bag-module-875823/)

1996LT1Z28 09-09-2013 11:46 AM

Drivers seat belt buckle continuity test for Air Bag Module
 
Does anyone know what continuity measurement could be expected when measuring the two pins on the drivers seat belt buckle wires that goes up to the air bag module.

Measured mine, and it was all over the map. This could be causing my air light staying on after the self test.

Any help would be greatly appreciated.

bobdec 09-09-2013 02:06 PM

Re: Drivers seat belt buckle continuity test for Air Bag Module
 
Don't have a '96 book, on my '94 it's only a N/C switch to chassis ground. Pin B is grounded to chassis. pin A grounded with belt UN-buckled, pin A open with Belt buckeled.

1996LT1Z28 09-09-2013 07:39 PM

Re: Drivers seat belt buckle continuity test for Air Bag Module
 
Bobdec -- thank you!!!!!! I really appreciate it!!!!! :D


All times are GMT -5. The time now is 02:03 AM.


Copyright © 1996-2013 CamaroZ28.Com. All rights reserved.


Garage Plus vBulletin Plugins by Drive Thru Online, Inc.