bumpin_z

All right thank you in advance for all that will look and try to help me. Here is my issue:

So I replaced my DR side pwr window motor today and all was well, enjoyed a nice hour cruise with the t-tops out and windows down. I got home and parked the car in the driveway and went back for a ride a few hours later and my radio had quit working. So I went to a buddies house thinking the fuse for the radio must have blown somehow and on the way there I looked down at my odometer and the display was blank??? I have no idea what the problem is. So I took the radio out and checked voltage at the pigtail and I was getting a weird 2.xx volts at the constant 12v and then I turned the key to AUX and I was getting a similar reading there. Does anyone have a clue what may be causing this? Oh yeah and I went to put my windows up a little bit ago and the pass window decided to stop 11/2" or so from the top so it looks like I will be replacing that soon!

Thanks again!

shoebox

Sounds like it could be a BCM issue.

bumpin_z

Would that cause my hatch release to fail as well? The underdash relay clicks but does not release the hatch.