gelbza

I'm about to install a Viper alarm/remote start/keyless entry unit that I've had sitting around for about 5 years. I know that wiring into the 5-wire reverse polarity setup is a challenge with this car, and if I remember right it requires a relay of some sort. The problem is, the last time I did this was 2003, and I've forgotten everything about the relay. I've searched for a couple days, but most links to guides are broken as they were written in the 90's. (God I feel old).

Basically, does anyone have any info on this stored somewhere? I know Brent Franker has a link to a zip file for 93 to 95 info, but the link doesn't seem to work. Does anyone have a copy of it stored somewhere?

I have looked at the12volt.com alarm wiring page, but it doesn't say anything about relays, and the wiring is actually for a car with factory keyless entry.

Thanks in advance!

Injuneer

Find a post by "Brent94Z". In the post, left click on his screen name, and in the drop down select "send email to Brent94Z".

Don't select "send a private message" - he doesn't come here much any more.

Might be able to find out what happened to the documents in the .zip file.

gelbza

Actually after posting the initial question here, I tried using the email address he has on his web page (total long shot given that the page has been up for over 15 years), and he actually replied within about 20 minutes though. He explained how to download the file, so all is good, but thanks for the help just the same.