2000 Base Firebird 3.8 v6 SES cold p0306 PLEASE Help!!! - CamaroZ28.Com Message Board

Go Back   CamaroZ28.Com Message Board > 1967-2002 F-Body Technical Discussion > General 1967-2002 F-Body Tech

Reply Post New Thread
 
 
LinkBack Thread Tools Search this Thread
Old 11-01-2013, 07:22 PM   #1
Registered User
 
Join Date: Nov 2013
Posts: 2
Angry 2000 Base Firebird 3.8 v6 SES cold p0306 PLEASE Help!!!

I've recently purchased this vehicle and have been doing maintenance to it for a couple weeks now but I cannot get this code to disappear. I've replaced the coil packs, the spark plugs and wires, the fuel filter, the oil and air filter and other things and it still won't go away. Is there anything else I can do? I do not want to put it in the shop, but it's looking like I might just have to. Recently the SES light has started to flash and then go away for a little while just to appear again later, and it's a little harder to start than I'd imagine it should be, and the car seems to idle pretty bad. It feels like it's rhythmically shaking when it idles now even when the light isn't on. ANY help or insight would be so appreciated. Thanks for your time.
jason21308 is offline   Reply With Quote
Old 11-02-2013, 10:15 AM   #2
Super Moderator
 
Injuneer's Avatar
 
Join Date: Nov 1998
Location: Hell was full so they sent me to NJ
Posts: 43,060
Re: 2000 Base Firebird 3.8 v6 SES cold p0306 PLEASE Help!!!

Try swapping #6 fuel injector with another cylinder, and see if the code follows the #6 injector. While you have the fuel rail off, pressure the fuel system by turning the key to "run" (not to "start") and see if the injector is dripping.

Do a compression check.

Check the valve adjustment.

Have the ignition control module checked.
__________________
Fred

94 Formula A3+1: 381ci all-forged stroker - Callies Stealth, Oliver 5.85 billet rods, BME nitrous pistons / CNC LT4 heads / Comp Cams custom solid roller / TH400 + GearVendors OD / Strange 12-bolt - 4.11's / 300-shot N2O / Spohn suspension / 6-pt roll bar with integrated SFC's / AutoMeter instrumentation / MoTeC M48Pro engine management system / a few other odds 'n ends. 800HP/800LB-FT at the flywheel.
Injuneer is offline   Reply With Quote
 
Reply Post New Thread

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 05:18 PM.

 

Copyright © 1996-2013 CamaroZ28.Com. All rights reserved.