whats the width of a 96 camaro rear end??
#2
Where do you need the measurements taken from? Axle hub to axle hub? End of the tubes? I've got a diff out in my garage I can measure.............I'll get some #'s for you later today.
#4
Okay, I took measurements in a couple places cause I didn't know where you'd want them from.
From the outside face of the axle hub to the opposite axle hub, I got 5' 4-3/4".
From the outside face of the backing plate to the opposite backing plate, I got 5' 1".
From center to center of the spring perches, I got 3' 4".
If you need more specific info, let me know. Hope that helps.
From the outside face of the axle hub to the opposite axle hub, I got 5' 4-3/4".
From the outside face of the backing plate to the opposite backing plate, I got 5' 1".
From center to center of the spring perches, I got 3' 4".
If you need more specific info, let me know. Hope that helps.
#6
This diff I have doesn't have brakes on it, so I can't give you disc to disc, but what I gave you should be close. But if you look at the measurements I got (5' 1" from backing plate to backing plate), that's 61", and I don't think the discs would be any further inward than the backing plates since the calipers bolt on to them, so I'd say that disc-to-disc probably wouldn't be less than 61", and definitely not less than 58"? If that's the case, then the rear end may not work for that guy?
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
02-09-2016 09:21 PM
ChrisFrez
CamaroZ28.Com Podcast
0
12-28-2014 02:25 PM