New Lt1 Stockhead best
11-30-2003, 12:51 AM
#1
Registered User
Thread Starter
Join Date: Oct 1998
Location: Houma,Louisiana
Posts: 274
New Lt1 Stockhead best
Most of you folks know my setup. Lt1 stockheads,boltons,na street car. Today I got a slightly new best. I ran at No Problem Raceway in Louisiana the temperture was 60 degrees with low humidity and a decent baro. The Da was -26 ft. I ran 11.40 116.59 with a 1.483 60ft. Car weight was 3195 with me in it.
Frank95z
What kind of flow numbers are you getting out of those LT1 castings? If you don't mind telling. 
11-30-2003, 10:46 AM
#5
Registered User
Thread Starter
Join Date: Oct 1998
Location: Houma,Louisiana
Posts: 274
Kain my heads are stock unported I had them flowed at Thunderracing and they flowed 185 intake 150 exhaust then I went to a different flowbench and they flowed 205/160. I am still trying to maximize the stockhead /baby cam setup before I go the ported head/big cam route. Frank95z
11-30-2003, 12:14 PM
#7
Registered User
Thread Starter
Join Date: Oct 1998
Location: Houma,Louisiana
Posts: 274
Based on the dyno the cam makes power to 6200. Thats where I shift it also. Has a nice mild lope at 210/224 with a 112 center. Very drivable and street friendly. I still get 20mpg on the highway. Frank95z
11-30-2003, 10:37 PM
#8
Registered User
Join Date: Apr 2000
Location: St. Louis, MO
Posts: 708
Originally posted by Frank95z
Kain my heads are stock unported I had them flowed at Thunderracing and they flowed 185 intake 150 exhaust then I went to a different flowbench and they flowed 205/160. I am still trying to maximize the stockhead /baby cam setup before I go the ported head/big cam route. Frank95z
Kain my heads are stock unported I had them flowed at Thunderracing and they flowed 185 intake 150 exhaust then I went to a different flowbench and they flowed 205/160. I am still trying to maximize the stockhead /baby cam setup before I go the ported head/big cam route. Frank95z
12-01-2003, 09:15 AM
#13
Registered User
Join Date: Jul 1999
Location: Six Mile, SC, USA
Posts: 2,054
Very sweet. I would like to know the secret of getting the small cam to run like that. I was hoping i could get the HOT cam down in the 11.9s but I am almost tired of trying. looking at larger cams and more head to get there....congrats!!!!
12-01-2003, 10:48 AM
#14
Registered User
Join Date: Jan 1999
Location: Baton Rouge, la
Posts: 989
congrats frank. That thing is moving..as usual.
everyone..the secret is frank. He has been tunning..and testing..and optimizing this thing for a long time. His car just goes to show that its not just throwing parts at something that makes you go fast.
everyone..the secret is frank. He has been tunning..and testing..and optimizing this thing for a long time. His car just goes to show that its not just throwing parts at something that makes you go fast.
