94Z bricked PCM help
07-22-2015, 10:25 PM
#1
Registered User
Thread Starter
Join Date: Oct 2001
Location: Greenville Tx Us
Posts: 553
94Z bricked PCM help
I got the wonderful "Invalid response from PCM" on tunercat directly after the erasing flash memory message.
I've got a chip burner that supports the flash chip and the socket adapters so I've got that covered. However all I have are the .bin files I read from the PCM through tunercat. Those files are 128k. The chip is a 512k so the math doesn't pan out. Guessing, I need a 64k file in a .bin to flash onto this thing.
Can I use the stock .bin file from tunercat or is there another file I need?
I've got a chip burner that supports the flash chip and the socket adapters so I've got that covered. However all I have are the .bin files I read from the PCM through tunercat. Those files are 128k. The chip is a 512k so the math doesn't pan out. Guessing, I need a 64k file in a .bin to flash onto this thing.
Can I use the stock .bin file from tunercat or is there another file I need?
Thread
Thread Starter
Forum
Replies
Last Post
Nayr
LT1 Based Engine Tech
7
03-03-2023 08:34 PM