I don't know nothin'... BUT I NEED to know...
#1
I don't know nothin'... BUT I NEED to know...
what engines were available for the pre-1970 Z28's.
I'm not a gear head - I'm a pilot - but I'm in a discussion with a fella and this has come up. I figure this is the best place to ask!
Thanks!
Tom
I'm not a gear head - I'm a pilot - but I'm in a discussion with a fella and this has come up. I figure this is the best place to ask!
Thanks!
Tom
#2
1st generation Z28's all had 302 cubic inch motors. There were minor differences in specs but they all had 4" bore x 3" stroke cranks, 2.02" intake valve, 1.6" exhaust valve, solid lifter, aluminum intake, Holley carbs, pop-up domed pistons.
The 350 cubic inch Z28 did not appear until the 1970 1/2 Camaro was introduced.
The 350 cubic inch Z28 did not appear until the 1970 1/2 Camaro was introduced.
Thread
Thread Starter
Forum
Replies
Last Post
Magenta_Hearts
LT1 Based Engine Tech
15
03-29-2017 08:54 PM
Sergio
LT1 Based Engine Tech
11
01-27-2016 04:27 PM