Supercharged 94 trans am $6200 obo
03-19-2009, 12:43 PM
#1
Registered User
Thread Starter
Join Date: May 2006
Posts: 190
Supercharged 94 trans am $5800 obo
I have a 94 trans am, red with t-tops for sale
Mods include:
newly built lt1 .060 over, sonic checked with forged Cola Race crank
CP forged dished blower pistons- 2nd ring is gapless for blower appl.
Scat forged 6.0 rods
Brand New GM Optispark
Comp cams custom 230/236 584/585 lift 115ls with 4 deg advance
Vortech t-trim with vortech race bypass.
LE2 heads with .600 lift springs and titanium valves
1.5 roller rockers
Intake is gasket matched to heads and ported by Jim Terrian in Detroit
Dynatech LT ceramic coated headers
True dual 3inch exhaust to dual 4inch dynomax bullets then dumped before axle
Fresh auto raptor trans with Vigilante 3200 stalle.
BMR weld in sub-frame connectors
BMR adjustable Traction arm
BMR tubular rear control arms
98 style tail lights
Madz28 pcm set up for current motor
MSD 6a box
Walbro 255 intank pump
42.5 green top injectors
Canton valve covers and oil pan
Weld Draglites all around included with ET Drags and skinnies
Car only has 90k on the odo but the new motor has only 300 if that. Runs right but def needs a good dyno tune. Asking 5800.00 obo. Must be able to come get car or meet in michigan somewheres
THE BAD: headliner around rear view mirror is coming unglued a bit, corners of hood are chipped from being moved, needs a new dipstick tube (current one is bent and not fully seated but is there) No rear seats. All very easy and relatively cheap to fix
Please make some offers
810-287-4489 and ask for Dan
Mods include:
newly built lt1 .060 over, sonic checked with forged Cola Race crank
CP forged dished blower pistons- 2nd ring is gapless for blower appl.
Scat forged 6.0 rods
Brand New GM Optispark
Comp cams custom 230/236 584/585 lift 115ls with 4 deg advance
Vortech t-trim with vortech race bypass.
LE2 heads with .600 lift springs and titanium valves
1.5 roller rockers
Intake is gasket matched to heads and ported by Jim Terrian in Detroit
Dynatech LT ceramic coated headers
True dual 3inch exhaust to dual 4inch dynomax bullets then dumped before axle
Fresh auto raptor trans with Vigilante 3200 stalle.
BMR weld in sub-frame connectors
BMR adjustable Traction arm
BMR tubular rear control arms
98 style tail lights
Madz28 pcm set up for current motor
MSD 6a box
Walbro 255 intank pump
42.5 green top injectors
Canton valve covers and oil pan
Weld Draglites all around included with ET Drags and skinnies
Car only has 90k on the odo but the new motor has only 300 if that. Runs right but def needs a good dyno tune. Asking 5800.00 obo. Must be able to come get car or meet in michigan somewheres
THE BAD: headliner around rear view mirror is coming unglued a bit, corners of hood are chipped from being moved, needs a new dipstick tube (current one is bent and not fully seated but is there) No rear seats. All very easy and relatively cheap to fix
Please make some offers
810-287-4489 and ask for Dan
Last edited by xxxtreme36; 05-04-2009 at 06:32 AM.
