Lt1son

Well time has come to sell my 1994 z28- Car is heavily modded from engine to suspension. Ive owned car for around 8 years. This past year or two ive done almost all of the performance work to the car. 156k on odo but about12-1300 on motor -- List as follows:

Car dynoed tuned at 353hp/369Rwhp--Conservitive tune Car Ran 12.4x w/ 1.74 60' shifting at 5800-6000 Car Has High 11's in it

Engine- Decked/Balanced Rotating Assy/Line Honed/New Freeze Out Plugs/Polished and turned stock crank Has
-4bolt main block .30 over/ mahle forged pistons/eagle h-beam 6" rods/ file fit rings/all arp harware/ high volume oil pump
-Heads mild port work with bigger valve 2.0 1.56/3 angle valve job /54cc Heads/w/ comp 987 double springs
-CC503 Cam 537/544 lift
-Comp 7/16" Ultra Pro Mag 1.6rr(the pics show the old gmpp rockers)
-Trickflow Guide Plates
-arp 7/16" screw in studs
-Double Roller Timing Chain
-Electric Water Pump
-Moroso CAI
-Trickflow Ceramic Intake Arm
-Borla stainless CME(center mount exhaust) with painted valance
-Pacesetter offroad longtube headers/y-pipe
-BBK twin 58mm tb
-Ported Intake
-30# Redtop Svo injectors
-New GM Opti/Msd Plugs/NGK TR55 Plugs/All New Engine Sensors As Well
-Canton Valve Covers

Suspension-
-Moser 12bolt with 4:11 gears 31 spline axles-auburn posi
-Viking Double adjustable front coilovers w 300# race springs and 18 pos adjustable comp & rebound
-Viking Double adjustable rear shocks w 18 pos comp and rebound sitting on vogtland drop springs
-BMR adjustable torque arm
-BMR panhard bar
-BMR rlca's
-BMR tubular k-member
-BMR adjustable front lower control arms
-SPOHN fr. upper control arms
-Lakewood Driveshaft loop
-UMI 3 point Sfc's
-Brand New Fr Pads/Rotors
-Brand New R Pads/Rotors
-Fr Stainless brake lines
-New Rear Line W/ Adj Pro Valve

Transmission-
-6spd with spec stage 2+ clutch & pp
-stock lightened flywheel
-stock rims with m/t et streets >500 on them

Misc-
-Pioneer Deck W Aux output
-Subthump hidden box w/ pioneer 10" sub
-Sony Xplode 800 watt amp
-T-top Car
-SLP manual fan switch hi/low/stock operation function
-MSD Coil
-MSD Wires
-Autometer Level 2 Shift Light
-Scanmaster Lt1
-Walbro 255lph Fuel Pump

Also has a harwood 2.5" cowl hood
Comes with stock hood as well

Headiner could use replaing starting to sag near visors--has a ding near RR wheel well--bumper a little chipped---car was painted about 5-6yrs ago and still looks good. Not really sure what the car is worth--- So taking offers

Link to craiglist add w pics....

--1994 Camaro Z28/6 Spd/T-top--Heavily Modded