|
||
Need a place in College Station to put clutch in?High HP TA 02-24-2003, 02:33 PM Does anybody know a good place to get a clutch disk installed in the college station area. My stage III kevlar spec needs to be switched out with a carbon one. I have called a couple shops and they charge $350 and that is a little steep for me. Someone please help. SStupid 02-25-2003, 04:24 AM My brother does side-work in Bryan, TX. He used to do a lot of work for the A&M car club back in the early 90s. I'll ask him if he's interested and let you know. High HP TA 02-25-2003, 02:13 PM There is a guy named jordon musser that emailed and said he could do it at his shop for 300, but has anybody had things done from him before that can back his stuff up. eddiezlt1 02-25-2003, 02:24 PM Originally posted by High HP TA There is a guy named jordon musser that emailed and said he could do it at his shop for 300, but has anybody had things done from him before that can back his stuff up. $300 is very high for a clutch and jordon does know what he is doin any shop in san antonio will charge you $200 turn key 59apache 02-25-2003, 02:42 PM j&p standard transmission on hwy 21 High HP TA 02-25-2003, 02:43 PM what about it? is that where Jordon's shop is located? 59apache 02-25-2003, 02:47 PM no that is the place to take your car for the clutch install call them, i believe it is 200 bucks, call and make sure, i'm on campus or i would get you the number justin SStupid 02-25-2003, 05:00 PM My brother is booked up with his own stuff, but it looks like you have plenty of options. Sorry. I suggest paying someone like Jorden to use his space and tools and do it yourself. It's a good learning experience. fast 93 z 02-25-2003, 06:39 PM Call James at J & P Standard Transmission. He is located on Hwy 21 in Bryan about 2 miles off of HWY 6. He does great work and I still send him my side jobs when needed! The rates are lower than anyone you will call on. He has rebuilt around 10-15 6-speeds for me and my friends! Tell him I sent ya! He will give ya a good deal! Tony Shepherd AHARTZ28 02-25-2003, 08:20 PM $225 in SA i will do it eddiezlt1 02-25-2003, 08:59 PM well if you have soom time drive to austin i will do it for you but you have to help me lift ;) 1BAD80-Z 02-26-2003, 08:15 PM I run a shop here in Bryan , and I'll beat your best deal , and give a limited warranty !! We are ASE certified and a reputable shop , call me @ 779-6387 when you want the job done ( You supply the parts ) we generally give same day service and specialize in Hi-Po work !! Ed :) :) AHARTZ28 02-26-2003, 08:20 PM Originally posted by 1BAD80-Z I run a shop here in Bryan , and I'll beat your best deal , and give a limited warranty !! We are ASE certified and a reputable shop , call me @ 779-6387 when you want the job done ( You supply the parts ) we generally give same day service and specialize in Hi-Po work !! Ed :) :) I am ASE cert GM master tech as well and will beat any price ;) but i am in SA :( eddiezlt1 02-26-2003, 08:34 PM Originally posted by AHARTZ28 I am ASE cert GM master tech as well and will beat any price ;) but i am in SA :( if you can beat $200 let me know i will send you some work have you dont a twin disk ?? AHARTZ28 02-26-2003, 08:37 PM $190 single disk eddiezlt1 02-26-2003, 09:05 PM Originally posted by AHARTZ28 $190 single disk so you wont go under $200 for a twin ??? 190 for a single how long same day? | ||