|
||
Any pics of race-type auto shifters in 4th gen?rskrause 02-10-2003, 01:17 AM I am trying to figure out how to install an aftermarket race type automatic shifter in my 4th gen. Anyone have any pics of a neat way to do this? Any recommendations on shifter brand (for a reverse manual TH400)? Thanks. Rich Krause JC93Z 02-10-2003, 08:43 AM Here is a pic of my Hurst pistol grip quarter stick. I had a 6-speed before so I just made the shifter boot fit over it. http://www.hustonstreetracing.com/jerrypics/shifter2.JPG rskrause 02-10-2003, 09:10 AM Thank you both very much! Anyone else? Rich Krause RacinLT1 02-10-2003, 10:04 AM Check both links in my signature,i have a B&M Pro Stick in the stock A4 console. The second link is without some of the interior. Nostang 96z 02-10-2003, 10:24 AM Some pics of my shifter are on this site: www.rhodescustomauto.com , click on the red fourth gen on the main page and it will give you a bunch of pics. Matt rskrause 02-10-2003, 11:28 AM Originally posted by Nostang 96z Some pics of my shifter are on this site: www.rhodescustomauto.com , click on the red fourth gen on the main page and it will give you a bunch of pics. Matt Nice car! Thanks to you and "RacinLT1". Rich Krause Daddyo 02-10-2003, 01:00 PM Yeah very nice car. Z28Racer93LT1 02-10-2003, 03:29 PM If you are still looking for some pics. I have a Turbo Action Cheetah Shifter in my car. Many pics of the install on my site. www.z28racer.com look under the trans section. Ken Brady 02-10-2003, 04:34 PM Mine, if you haven't seen it already :) http://turbocharged.net/twinturbo/shifter/ rskrause 02-10-2003, 07:36 PM Thanks to you all for the links. Very helpful! Rich Krause Injuneer 02-11-2003, 05:14 PM B&M Pro-Ratchet, in stock M6 console..... Install (http://cjcfo.fbody.com/members/injuneerzz@aol.com/PhotosB/Shift03a.JPG) Photo 1 (http://cjcfo.fbody.com/members/injuneerzz@aol.com/PhotosG/Dcp02790a.jpg) Photo 2 (http://cjcfo.fbody.com/members/injuneerzz@aol.com/PhotosI/DCP02921a.jpg) The boot has "snaps" on it to hold it closed, and to allow it to be pulled up and off with the surround ring, to make the gear position indicator visible for racing. rskrause 02-11-2003, 06:27 PM Originally posted by Injuneer B&M Pro-Ratchet, in stock M6 console..... Install (http://cjcfo.fbody.com/members/injuneerzz@aol.com/PhotosB/Shift03a.JPG) Photo 1 (http://cjcfo.fbody.com/members/injuneerzz@aol.com/PhotosG/Dcp02790a.jpg) Photo 2 (http://cjcfo.fbody.com/members/injuneerzz@aol.com/PhotosI/DCP02921a.jpg) The boot has "snaps" on it to hold it closed, and to allow it to be pulled up and off with the surround ring, to make the gear position indicator visible for racing. Thanks! Rich Krause 90 Z28SS 02-12-2003, 01:21 AM Theres a couple pics of mine in my . Its a B&M Hammer shifter . Been using it for about a year now with a manual VB and I love it !!! I used a stock 6-speed console and boot to cover eveything all up :) speedmiser 02-12-2003, 03:12 AM My megashifter (http://images.cardomain.com/installs/201000-201999/201570_34.jpg) ky94transam 02-12-2003, 06:39 AM B&M Quicksilver Shifterhttp://people.maxweb.com/allen/uploads/shifter.JPG rskrause 02-12-2003, 07:30 AM Originally posted by ky94transam B&M Quicksilver Shifterhttp://people.maxweb.com/allen/uploads/shifter.JPG Very nice! Thanks. Rich Krause The Big Show 02-12-2003, 10:37 PM Cheetah Shifter (http://www.fbody.com/members/GreenMeany/Pics.htm) Scroll down a bit and you'll see a nice pic of the cheetah shifter looking right at home. rskrause 02-13-2003, 09:04 AM Originally posted by The Big Show Cheetah Shifter (http://www.fbody.com/members/GreenMeany/Pics.htm) Scroll down a bit and you'll see a nice pic of the cheetah shifter looking right at home. Again, thanks! Rich Krause lt1camaroman93 02-17-2003, 12:32 AM click the link in the sig, then click on pics of the car, and its the 3rd one down.. its not the best pic but does the job. B&m pro stick | ||