|
||
cam button99huggerorangeZ 01-19-2003, 10:34 PM when installing a roller camshaft do you need to install a cam button i am building a 377 and am going to be installing a gm lt4 hot cam with .525/.525 lift at .050 drop top steve 01-19-2003, 11:35 PM The Lt1 has a cam retainer plate oem. Injuneer 01-20-2003, 12:26 PM I'm going to ask you one more time..... 1) PLEASE include info about your car and engine in the "signature" section when you post a tech question. I was under the impression (possibly incorrect) that you had a 3rd Gen with a Gen 1 SBC. What kind of car do you have, what is the year, and what engine is in it? 2) PLEASE post routine questions on the appropriate board.... "3rd Gen Tech", "LT1 Tech", etc. You have been asked politely by both Ken and me to conform to board rules. PLEASE cooperate, or your right to post will be revoked. Fred Moderator - Advanced Tech 99huggerorangeZ 01-21-2003, 01:33 AM it is a 91 RS that had a stock 305 in it but i am replacing it with a 450HP 500LBS of torque 383 Injuneer 01-21-2003, 11:54 AM Originally posted by badassbowtie400 it is a 91 RS that had a stock 305 in it but i am replacing it with a 450HP 500LBS of torque 383 ....and would that 383 be based on a Gen 1 or Gen 2 SBC??????? If its Gen 1, post on "3rd Gen Tech".... if its Gen 2, post on "LT1 Tech". | ||