which wires?

vinnyxgunz
08-25-2002, 12:58 PM
which wires are the best to get for jl subs and rockford amps? thanks

------------------
1993 CAMARO Z28
A4, black/black, 3.23

slp loudmouth exhaust, throttle body coolant bypass, clear turn signal covers, rksport solarwing, white vinyl decals, pioneer head unit, pioneer 3-way speakers

LS1 RULZ
08-25-2002, 03:31 PM
The ones made out of copper.

PaulN64
08-27-2002, 01:55 AM
http://knukonceptz.com/
these work pretty good for the price

------------------
1997 Camaro Z-28 SS #0728

Flowmaster, Hooker Header tips, BMR strut tower brace, lower control arm and relocation bracket, Optima Yellow Top battery, Granatelli lowering springs, KYB AGX shocks, Lakewood panhard rod, Bear bump steer, 17 x 9.5 Z06 rims

Audio/Video:
Head Unit ----- Pioneer AVX-P7000CD
Master Unit --- Pioneer AVM-P9000R
DVD Player ---- Pioneer XDV-P9

Front --- Focal Polykevlar 165K2 w/ TN-51 tweeters
Rear ---- Focal Polykevlar 165K2
Sub ----- Lightning Audio 10.2.4
Amp ----- Phoenix Gold XS6600

My SS homepage (http://www.sounddomain.com/id/pauln64)
CAR AUDIO PLANET (http://www.caraudioplanet.com)
Georgia F-Body Association (http://www.gafba.com)

97FormulaWS-6
08-27-2002, 09:14 AM
I'll second the KnuKonceptz....

For a Kit setup....

I normally buy my own parts seperately...

Mike

------------------
1997 Formula WS-6, 1 of 473

Mods: P&P MAF, Pro-5.0, SLP LT4 Clutch, 200 Amp Alt, TB Bypass, !AIR, !CAGS, 160 therm, CSI WP, PS Cooler, GMS STB, Cutout, TCI LineLock, ES Swaybar/Trans/TA Bushings, 5%R/20%S Tint, Painted Calipers, Custom Clear Tail Lights/Corners

http://camaroz28.cardomain.com/id/97formulaws6

guyomatic
08-27-2002, 11:19 PM
Just make sure the guage is thick enough and they are oxygen free.

------------------
96 Z, T-tops,M6,K&N FIPK,HPP+,160*,Borla Cat-back,52mm BBK TB, TB by-pass,Edelbrock shorty headers,Granatelli MAF,Accel Extreme wires,NGK TR55's,FireBall Coil

92 ZX-7

Audio:
Alpine Head Unit, MP3
Hifonics Z700 amp
Infinity Kappa 6.75" 2-ways
SPL 10 in MTX Thndrfrm stealth bx
Kenwood KDC-C565FM 10 disc changer
Optima Yellow top

firebirdude
08-28-2002, 10:41 PM
14 gauge will probably be big enough. You COULD run 12 if you really wanted. Or you could be like some I've seen and run 8 gauge!!! ;op