MAGNAFLOW - 2010 Camaro Performance Exhaust Systems

MAGNAFLOW has released a myriad of exhaust systems to meet all your RS and SS Exhaust needs.

2.5" and 3.0" complete cat-back systems, 2.5" axle-back systems, 4" Double wall, 5" Rolled edge tips and accomodations for GMPP fascia equipped vehicles. All of these options are available as Street and Competition Series for a mild or wild exhaust note.

2010 Chevrolet Camaro SS (Standard Fascia)

http://www.magnaflow.com/richard/2010Camaro/4inchSS.JPG
16579 2.5" Street Series Cat-back Performance Exhaust (4" Tips)

http://images.magnaflow.com/02product/parts/16579.jpg

16581 2.5" Street Series Axle-back Performance Exhaust

http://images.magnaflow.com/02product/parts/16581.jpg


http://www.magnaflow.com/richard/2010Camaro/5inchSS.JPG

16580 2.5" Competition Series Cat-back Performance Exhaust (5" Tips)

http://images.magnaflow.com/02product/parts/16580.jpg

16582 2.5" Competition Series Axle-back Performance Exhaust

http://images.magnaflow.com/02product/parts/16582.jpg

2010 Chevrolet Camaro SS (GMPP Fascia)

2.5" Street Series Performance Exhaust System

Stock System with visible inner tip -------------- MAGNAFLOW system with hidden inner tip
http://www.magnaflow.com/richard/2010Camaro/GMPPSTK.JPG http://www.magnaflow.com/richard/2010Camaro/GMPPMAG.JPG

Check out www.magnaflow.com for additional information, images, sound clips and dyno charts.

Check out www.camaroz28.com sponsors (http://www.camaroz28.com/links/browselinks.php?c=2) for pricing ... these systems are IN STOCK!

Richard

16580 2.5" Competition Series Cat-back Performance Exhaust (5" Tips)

5 inches in diameter? EYOW! :eek:

Street Series comfort and or Competition Series roar

2.5" exhaust or 3.0" exhaust

Cat-back or axle-back

4" tips or 5" tips

All have dyno proven power, stainless steel construction and a lifetime warranty.

Options are good :D ...

Does the front muffler case on the cat-back system house a crossover? Any plans for a true x-pipe system with bullet style mufflers?

Does the front muffler case on the cat-back system house a crossover? Any plans for a true x-pipe system with bullet style mufflers?

The front muffler contains our Tru-X internal and there is no real reason for bullet mufflers as our straight through mufflers have the same flow properties.

http://www.magnaflow.com/richard/2010Camaro/Camaro%20internal.JPG

Thanks for the info. I figured the mufflers flowed very well. That is just a tone preference on my part. Is there packing in the crossover section?

Thanks for the info. I figured the mufflers flowed very well. That is just a tone preference on my part. Is there packing in the crossover section?

Indeed ... the entire section is steel wool wrapped and then packed with basalt.

Is the tru-flow X-pipe sold seperately?

Is the tru-flow X-pipe sold seperately?

depends if you get the cat back or axle back. that x pipe is inside the muffler itself. the picture is showing the inside of the mufflers.

I know it comes with the cat back system but I can I buy a tru-x muffler by itself? The picture is showing the inside of the tru-x muffler which is the x-pipe for the system. The diagram is not showing the rear muffler, it is labeled front muffler ie, mufflered x-pipe.