2000zee28
01-11-2003, 10:57 PM
Newbie question. I am looking at the Aibox and wondering if I removed it. Removed the plastic panel behind the washer bottle,
If I could install a 3.5 tygon hose with a cone K&N and basically have all the advantage of the FIPK with cooler air from down below the washer bottle. Is there enough hood clearance in between the core support and the hood for this. This would connect straight to the MAF.
If I could install a 3.5 tygon hose with a cone K&N and basically have all the advantage of the FIPK with cooler air from down below the washer bottle. Is there enough hood clearance in between the core support and the hood for this. This would connect straight to the MAF.