Wich wire and plug gap for ltcc install

Well after one year of problems i ve finnally come down to 2 or 3 problem so now i will have time to install my ltcc.

-I got the ltcc kit with ls2 connectors from Bob;
-I also got 8 brand new ls2 coils with brackets;
-I got 8 ngk tr55 plugs
-Finnally 8 ls2 boot connectors kit

Important question:So now in the installs instructions it is written to not use some super low resistance plug wire type.So what wire should i use,i already know that i need customs ones but wich one and maybe a part number would be nice so that i could order the good one quickly ;)

And do i keep the .050" gap for the plug or do i need to change it because its not the same ignition system???

So now i only need those 2 answers to begin my install.
Thanks a lot.

I've been using Taylor wires and a .045 gap.

I've been using Taylor wires and a .045 gap.

Well thanks for the answer.

Anyone else have an input on that.I ve used some taylor (otvc kit) in the past and was really disapointed with them because they where arcing a lot.Maybe they have changed.

Well thanks for the answer.

Anyone else have an input on that.I ve used some taylor (otvc kit) in the past and was really disapointed with them because they where arcing a lot.Maybe they have changed.

You will need the universal set and customize your lengths.
Test test test.
We made 12/13 wires used 8 of them.

I used MSD's but Bob Bailey said NO.