BLWNLT1
02-06-2009, 03:43 PM
Man I sold my SRP pistons because of all the horror stories but don't know what and where to get pistons at. Any suggestions?
Eagle crank 3.480
eagle rods 5.7
4.035 dished pistons wanted since block was bored to 4.030 but srp sizes varies .029 - .032 :mad:
t76, real quick log manifold, ebay cold parts, In the process of getting a custom turbo cam from Ron at A.I.
I'm ready to get this ****er going been sitting for a long while now. 15#'s + of boost. No low boost mode, straight kill mode...
1996camaroSSclone
02-06-2009, 04:30 PM
I ordered one of A.I.'s rotating kits with compstar crank and rods and had it customized to include -31 diamond pistons.
jsetzer
02-06-2009, 05:19 PM
Running srps here...
22psi today
BLWNLT1
02-06-2009, 05:35 PM
where did you guys order from...?
Also thinking about mahle or diamond as well just need to know where to order on monday:)
1996camaroSSclone
02-06-2009, 11:46 PM
I ordered threw advanced induction but I think they ordered all my stuff threw callies. I think callies has a deal with the piston manufacturers for there rotating kits.
jsetzer
02-09-2009, 09:22 AM
My srps are used from this board :)
My shop gave me a real dirty look when I brought them in and asked them to check tolerances.
Used SRPs on a boosted motor? Yessir
engineermike
02-09-2009, 12:09 PM
Ross from gofaststuff.com
92LT1RS
02-11-2009, 08:06 AM
I ordered one of A.I.'s rotating kits with compstar crank and rods and had it customized to include -31 diamond pistons.
This.
97s10ondubs
02-21-2009, 08:55 PM
murray's speed and custom in miami, wiseco's
DirtyDaveW
02-22-2009, 10:38 PM
Got my 8.8:1 comp ratio Diamond pistons from Eric at Victory Racing. See the link in my sign (towards the bottom of the page)
Tricked-Out-Toy
03-02-2009, 08:44 AM
looks like you need to search on here for "Mahle 2618" and you will see my post. you will not find ANYTHING off the shelf from ANYONE else in a 2618 alloy that will fit a 3.48 and 5.7 rods. Ive looked/called JE/ROSS/DIAMOND/SRP/etc...
transamws6_97
03-02-2009, 08:47 AM
you should check out cnc-motorsports they should have what your looking for with some of the best prices