Cantonracers car is slow :D

It's alive again. Fear this

:p




http://img2.putfile.com/main/7/18519012894.jpg
http://img2.putfile.com/main/7/18519012940.jpg
http://img2.putfile.com/main/7/18519012928.jpg
http://img2.putfile.com/main/7/18519012967.jpg
http://img2.putfile.com/main/7/18519012912.jpg
http://img2.putfile.com/main/7/18519012817.jpg

:shrug: ok.

I was so hoping for pictures of an f-body w/ the twin turbo motor.

I was so hoping for pictures of an f-body w/ the twin turbo motor.

Here's as close as you'll get :p


http://www.shophoenixproject.com/sfb/pics/jackstands.jpg

:shrug: ok.

I'll try this real slow.

Post is in the Northeastern area section - Cantonracer and I live in an area covered under the Northeastern section, we are friends, we have other friends in the area covered under the Northeastern section.

I am saying his Z28 is slow, my Mustang is fast.

That's about as slow as I can go on that.

;)
:cry:
:p
:yes:

I will bring one of my wife's pads out for you because when my LT1 on motor is done with you are going to be bleeding bad....:lol:

Why is Ohio part of the Northeastern region? That's lame. Should be part of the Michigan / Great Lakes region.

I will bring one of my wife's pads out for you because when my LT1 on motor is done with you are going to be bleeding bad....:lol:

:p

My dude - taught me a lot about internet smack talk but the apprentice has overtaken the master.

I will do the same on the track

:eek:

Here's as close as you'll get :p

Awesome!!! BTW, what's up w/ your Mustang? I don't see a 5" monster tach in any of the shots:confused: I thought that was the first mod done to any of them.:p

Awesome!!! BTW, what's up w/ your Mustang? I don't see a 5" monster tach in any of the shots:confused: I thought that was the first mod done to any of them.:p

LOL - nice. I agree, I see a lot of tool Mustang owners who have a monster tach installed in a car that won't make power past 5200 :no:


Mustang is up and running great, i'm sitting here pondering whether to take it out to the track tonight for it's first runs since rebuilding the entire car and installing the turbo kit. I have some issues to work out but i'm itching :)


I miss my Z28 :cry:

Both cars are slow! I bet the mustang runs mids 12's now instead of high 12's. :D

Did you end up making it out to the track? I am hoping to head up there in a few weeks to try out my new upgrades from this past winter.

Both cars are slow! I bet the mustang runs mids 12's now instead of high 12's. :D

Did you end up making it out to the track? I am hoping to head up there in a few weeks to try out my new upgrades from this past winter.

What's up dude - long time no see. Got the car to the track and even with the issues, keep in mind it was running probably 4hrs before the track, I still went

12.04
11.66
11.54

Called it a night so that I could go home with no breakage. I fixed some of the issues and i'm working on it now (on break :) ) so it should be a little better by Tuesday when I head back up to D42.

The entire goal of this car was/is to beat my old Z28, 11.37, I think i'll accomplish that on Tuesday or very shortly after that.

FWIW - I can't touch Cantonracers car IMO, that mutha f'er runs good - and he had some major issues, never used his tbrake, short shifted, etc... :eek::eek::eek:

Yeah, it would be ugly for me :death:

Thats cool. Sounds like the car is running good. What is all done to the mustang?
Hopefully we'll catch you guys up at 42 in the future. I hope to be in the low 11's when I get up there with the new suspension and motor rebuild(rings didn't seat on last years).

It's a 306'' Ported TrickFlow heads, E303 cam, no accessories, boxed intake, AOD trans with DirtyDog converter, 31 spline 3.55 rear, fully adjustable suspension w/coilovers and solid bushings - car weighs around 2900 w/me in it.


Oh, and a 67mm hairdryer.


Just installed an MSD6AL ignition with a 2Step - building 5lbs of boost in the driveway so tomorrow I hope to get in the low 1.6's-upper 1.5's 60'. I have the car running pretty damn good now too - just gotta keep working on the bugs.

Hoping to install my valve body tomorrow before the track.

LOL - nice. I agree, I see a lot of tool Mustang owners who have a monster tach installed in a car that won't make power past 5200 :no:

Well, I had to ask since it looked like you were following the Fox Body modding book w/ the Draglites installed:p. Did you install too large of injector?

I'm only busting your ass because these are all my experiences w/ local Mustang owners.

LOL - nah - running 48lber's, just enough for what I need ;)

I agree on the Draglites and I didn't want them. Not the first choice at least. I would rather have had Convo Pros or Pro Stars but......Draglites are cheap, plentiful and still look pretty good.


If you've seen one Mustang you've seen them all - i'll agree to that :lol:

LOL - nah - running 48lber's, just enough for what I need ;)

I agree on the Draglites and I didn't want them. Not the first choice at least. I would rather have had Convo Pros or Pro Stars but......Draglites are cheap, plentiful and still look pretty good.


If you've seen one Mustang you've seen them all - i'll agree to that :lol:

I'm glad you have a sense of humor about the ribbing.

I'm glad you have a sense of humor about the ribbing.


Oh yeah, it's just a hobby - every bit of it is fun for me. Working on the cars, racing and the internet smack talk - I love it all, goes hand in hand.

I can dish it out and take it as well. Cantonracer USED to be good at smack talk but he's old, slow and out of the loop nowadays.

;)

... Cantonracer USED to be good at smack talk but he's old, slow and out of the loop nowadays.

;)


Well, when you have what he has under the hood you don't have to talk the talk. You can just show up and take people's money.

Well, when you have what he has under the hood you don't have to talk the talk. You can just show up and take people's money.

:D

He's got 396 cubic inches of Cracker Jack prize under that hood - don't let him fool you.

He now has a twin turbo kit lying in wait - turbos off of a Passat I think :lol:

I was wondering when all of this sh1t soup would be getting served up around the area. Handyman has been doing it for a while, and the tow truck used to alot, but now Darkhorse has the reins. Dont worry one of the red LTX's will be taking you to school soon, looks like your car is already parked in the appropriate spot :leaving:

-Dustin-

I was wondering when all of this sh1t soup would be getting served up around the area. Handyman has been doing it for a while, and the tow truck used to alot, but now Darkhorse has the reins. Dont worry one of the red LTX's will be taking you to school soon, looks like your car is already parked in the appropriate spot :leaving:

-Dustin-

LOL - nice!

Canton has still ran faster than me. Actually the fastest i've been was in that ragged old LT1 of mine :cry:

Havent heard crap talking in a while, so...bump, lol.

-Dustin-