|
||
MafTJ Chapman 04-16-2008, 01:52 AM i want to get a supersucker or a fast toys intake, im assuming i can still get an slp lid and use my k&n filter on top of that. (correct me anywhere im wrong) is it a good idea to get a aftermarket MAF sensor like SLP or others? or can this cause trouble with the car? as in more trouble than its worth ive just always heard to not mess with aftermarket on stuff like that at keep the genuine GM stuff. opinions? Marc 85Z28 04-16-2008, 09:44 AM On most applications, there is very little power to be gained, and lots of problems going to a different MAF. Keep the stock MAF. ss.slp.ls1 04-16-2008, 09:48 AM ^^^+1, keep the stock MAF. johnny6 04-16-2008, 10:04 AM It's not worth the extra money, i have an SLP MAF and there's no power gain at all, keep the stock one. OMGWTFBBQ 04-16-2008, 10:20 AM Upgrade to an LS6 intake, and keep the factory MAF. That's the ONLY way to gain power on that setup. All of the others are too high flowing for a stock motor. And drop the Flowmaster. =p Kraest 04-16-2008, 05:57 PM Stock MAF. TJ Chapman 04-17-2008, 12:03 AM yeah i kno bout the flowmaster im not a big fan, but thats how it came so it stays for now and yeah thats what i thought on the MAF thanks. Ls6 intake? as in intake manifold? what about others? holley, F.A.S.T., or such? ss.slp.ls1 04-17-2008, 03:00 AM If you can't afford the FAST, the LS6 intake manifold is a good economical substitute. Those are the only ones I would consider. Marc 85Z28 04-17-2008, 02:19 PM FAST intake for a bigger inch engine or a healthy heads/cam 346. LS6 for everything else. Forget about any other intake on the market, especially the aluminum intakes - they flow worse and make less power than the LS6. IXLR894Z28 04-17-2008, 03:32 PM I have the SLP MAF, and all it did was lighten my wallet.;) OMGWTFBBQ 04-17-2008, 10:11 PM I got an aftermarket MAF I can sell =p TJ Chapman 04-18-2008, 01:15 PM cool thanks ss.slp.ls1 04-18-2008, 01:21 PM cool thanks You're not really going to buy it are you? :confused: TJ Chapman 04-18-2008, 10:30 PM no no lol thanks---for the info :p tripp_symmes 04-22-2008, 06:25 AM Fast Toys 85 MM Lid with GM Z06 85 MM MAF, tables tuned results very good, was worth the money. TJ Chapman 04-23-2008, 12:01 AM well what is stock on ls1 camaro? 75mm? 80? (maf) so then u bought a used z06 one? or straight from gm? ss.slp.ls1 04-23-2008, 10:13 AM well what is stock on ls1 camaro? 75mm? 80? (maf) so then u bought a used z06 one? or straight from gm? Oem LS1 - 75mm. OMGWTFBBQ 04-24-2008, 11:08 PM http://www.ls1tech.com/forums/showthread.php?t=909147 tripp_symmes 04-25-2008, 06:38 AM well what is stock on ls1 camaro? 75mm? 80? (maf) so then u bought a used z06 one? or straight from gm? New from GM | ||