will these work good as a drag spring

will these work good as a drag spring i think thats the size and spring rate that are for 4th gens but i am not sure


http://store.summitracing.com/partdetail.asp?autofilter=1&part=HAL%2D10%2D150&N=700+4294925130+4294846689+4294790778+4294787535+ 4294787588+115&autoview=sku

Do you have QA1 coil-overs?

no will they work with a stock style shock?

The QA1 springs are only 2-1/2" diameter. The stock springs are much larger diameter. The smaller spring isn't going to fit correctly in the stock spring seat on the front shock.

Addtionally, are you looking for a front spring or a rear spring? 150 #/in is way low for a 4th Gen front spring.