Delteq and MSD DIS4 **need instructions or schematic**

96' F-body with functional proven Delteq install.

Now how do I put this MSD DIS-4 on here? :confused:

Delteq PDF instructions (http://www.delteq.com/Manual_r3.pdf)

MSD DIS-4 PDF (http://www.msdignition.com/pdf/frm25956_for_62112_62152/frm25956.pdf)

no answer on Delteq's phone line
Phone: 703-476-3566

just tryed calling again mail box is full

I left a message on Delteq's phone :rolleyes:
then the next call the message machine was full :confused:
repeated calls equal no answer :cry:

Several people have reported that Delteq is not responding to inquiries.

I'm abput to put this delteq on ebay and send back the MSD DIS-4.
Replace the whole thing witha LTCC unit with the rev limiter built in like i suggested to the sale dept. in the first place!

You will need 4 MSD coil adapters P/N 8870

http://www.msdignition.com/pdf/8870_frm25790.pdf

The wiring is pretty straight forward once you figure out the +12V coil terminal.
I sent you an email showing how I wired mine.