Anyone using an S400 75mm on 1.10?

how do you like it? when do you spool? whats your displacement?

Looking at the Majestic special?

I know plenty of the 351/357 Ford guys are using it. Should see similar results.

355-383 I would expect a little lag but honestly not bad. Full boost 3500-3800ish. Also give the guy a call if that is the one you are looking at. Dave (I think is his name) is real helpful.

Ya I was thinking about it, the price is really drawing me in! I cant find a Prescision T76 for under 1K and for my first turbo build I was hoping to go a little cheaper that way if I screw something up Im not out a 1K+ on a turbo.

Two options on the cheap. The master power t70 or the borg warner s400. Wish there was one in between the two.

I went with the t70. I know I will be limited to about 600 to the wheels, but even with my early tuning I have learned this thing comes on like spray. My car will always be a street car, so my choice was easy. I have logs showing 10psi below 2k rpms... Some of those oopsie moments.

A more drag oriented car and I wouldn't think twice about using the s400.

The MP is a T4?

Correct. But hey I stepped up from two t3s :)

theres also the compturbo PW67 supose to support 750hp, never heard of those guys, anyone using them?

Correct. But hey I stepped up from two t3s :)
Nice, whats your bottom end look like?

Two options on the cheap. The master power t70 or the borg warner s400. Wish there was one in between the two.

The GT42 is a 70mm wheel with a huge housing, should put you somewhere between the two performance wise. You can find them cheapish, maybe not as cheap as the MP T70 though.

Turbonetics also falls in between MP and Precision price wise.

We are saying cheapish as in $585 shipped for the t70 or the s400.

My bottom end is:
srp -24cc
eagle h beams
eagle 3.5 crank
2 bolt studded mains
- Pretty simple really, but it should make my goals.

who carries the s400?

We are saying cheapish as in $585 shipped for the t70 or the s400.

My bottom end is:
srp -24cc
eagle h beams
eagle 3.5 crank
2 bolt studded mains
- Pretty simple really, but it should make my goals.

Ya thats pretty damn cheap, If I toast $600 bucks it isnt to hard on the wallet. I can pick up two of those for the price of one Prescision.

thats what im thinking too, anyone got a good distributer of the s400 and the t70?

thats what im thinking too, anyone got a good distributer of the s400 and the t70?

PM Eric (Eric@VictoryRacing), I'm sure he can get you just about anything you want.

majestic turbo - wacko texas

Borg Warner S400 $725.00
TC Series Turbonetics $900.00

majestic turbo - wacko texas

Yup, Not to step on toes but they have them for under 600, for a 1.10 ar, and the t70 .96...

Borg Warner S400 $725.00
TC Series Turbonetics $900.00

:confused:

you can get a s400 for $565 or something all day anyday...

my T-netics was $1100 =[

Keep it civil guys.... VRE has been a big help and sold me stuff in the past. I wont keep a good deal to myself, but dont disrespect our good vendors either.

I have heard from a pretty reliable source that that is going to change very soon. .

:confused:

you can get a s400 for $565 or something all day anyday..

I have heard from a pretty reliable source that that is going to change very soon. .

Just got a PM back from Dave at majestic and he wont have any in stock until late march early april. Erick Is that 725 shipped? and is that the large frame, 1.10AR?

Just got a PM back from Dave at majestic and he wont have any in stock until late march early april. Erick Is that 725 shipped? and is that the large frame, 1.10AR?

See there is always a catch.

Finding a MP wasn't all that easy.

I think that is the smallest the s400 comes in, I could be wrong though.

Any turbo big enough to feed a small block for less than a grand is a pretty good deal though.

Can you get the vband kits for the s400 Erik? I have heard they are funny and off the shelf ones don't really fit. Compressor side has one too.

the s400SX offers alot more options on the exhaust side I think they have an .81 and .96 ar. BUT they are more sxpensive. Erick whats the price for those?

The S400 1.10ar/T6 flange $725.00

We have slip discharge instead of the V-band style.

S400sx .81 or .96ar $1100

Where do you find 1.10 ar/T6 housing?