Pics of the Polished STB, Aluminum Carbon fuel rails, Stainless stuff

Well I am far from finishing this engine bay up, but its getting there. I added:
*Hotchkis STB
*Stainless Steel Traction control box cover
*Stainless Steel Battery cover
*Stainless Steel Fuel rail cover strips with "camaro" etched in
*Aluminize Carbon Fiber fuel rails
*"LS1" head plate
*Billet Ktech Belt tensioner
*Custom TB plate for the 90mm intake (seen in the first pic behind the TB itself)
*Stainless air dam (not pictured for under the car, waiting for the fair to install don't want to damage it)

Looking for some valve covers, going to do the !wires thing as so as I find the write up, and I am making some polished aluminum stuff thats custom. Hope its ready by the State fair get together on the 20th :)

http://www.fquick.com/images/vehicles/full/711368422.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=68422)
http://www.fquick.com/images/vehicles/full/711368423.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=68423)

http://www.fquick.com/images/vehicles/full/711368424.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=68424)

http://www.fquick.com/images/vehicles/full/711368425.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=68425)

http://www.fquick.com/images/vehicles/full/711368426.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=68426)

that looks really good. way better than mine. you just finalized my decision to get a hotchis STB

damn... not bad.

i think id personally paint the fast intake black and do the raised part in silver (vs the silver and red) but still, pretty mf-in good

damn... not bad.

i think id personally paint the fast intake black and do the raised part in silver (vs the silver and red) but still, pretty mf-in good

Thanks guys...and I will actually have the intake painted in bright silver with the raised letters in black, or just shaved off completely.

That is if they don't make an aluminum carbon intake cover for the fast first. Then that will go on there :) I know they make one for the regular intake.

looks great. everything flows together.

What kind of system ya got in there?

:DWhat kind of system ya got in there?

JVC Arsenal Head unit (200w)
2 Sets of Alpine component speakers (4- 6 1/2" and 4 Tweeters)
2 12" Dual Voice Coil MTX's (with an rms of 300w each, if I remember right)
1 -Autotek 700w amp for the 12's
1 -Autotek 300w amp for the Alpines
1 -3 Farad Digital capcitor

Not the best system in the world but more than enough for my taste. It's pretty loud and very very clear:D

Oh and my head unit has a USB port right in front, So I have a micro 4GB USB stick and have a crap load of songs. Dont have to worry about burning, or discs getting hot, scratched CD's...etc. Its the best!

I think I would do the wire and cable mod and that's about it very clean very nice

Cool system :) I've got one in my Z that hit 145.5 a few years ago at a local comp, and that was with a few things that were going bad at the time! I'm sure it would have hit 146 had everything been where it needed to be, but the subs are old now, I doubt they'd hit that again without it being their last hurrah.

I was actually thinking of toning it down a little, but then again.. nahhhh:P

I love the fuel rail covers, looks awesome. :thumb:

I love the fuel rail covers, looks awesome. :thumb:

And I only had to sell a kidney to get them! The one I got left works like a champ though! Now, I need the Textralia clutch...Hmm lets see what I got.....:p