Anybody running nano n2o?

I really like the idea of using the nitrogen to push the n2o for better n2o distribution and using more than 4lbs of n2o in the bottle. Anybody make a homemade kit? LMK

i have been looking at them myself. if anyone pm's you let me know

at 600 bones...I will hang onto my bottle heater.

but it looks interesting

We are carrying the NANO line now....

http://www.nitrousoutlet.com/catalog/models.asp?group=36&model=139&dept=11

and I will be adding one of their kits to my own car.

This should cure my pressure drop issues and will work out to be a comparable intial expense and will actually save me money in the long run. I was planning on running a twin 10# setup

Extra 10# bottle $179 (ours)
Extra Bottle Heater $210 (860 Performance)
Misc lines and fittings ~$60
Total $449
If you add the heater I already have $659

But the big thing is the ability to use ALL the nitrous out of the bottle...my last trip to the track I had 5# in the bottle and only got 1 run...on the second I launched on 1100psi and was down to 800 around the 1/8 mile....weighed the bottle afterwards and still had ~3# left.

They also have an entry level kit for the casual nitrous user, it will support up to a 150 shot and starts at $497

beautiful. i will be getting in touch very soon

I've been running nano on my 96 formula and also ran in on my TrailBlazer SS and LOVE IT.

http://www.youtube.com/watch?v=3DPlEGO4E_o

I've also got my two 10lb nano kits for sale in the for sale section along with all my other nitrous parts since I'm going with a turbo setup.

I've been running nano on my 96 formula and also ran in on my TrailBlazer SS and LOVE IT.

http://www.youtube.com/watch?v=3DPlEGO4E_o

I've also got my two 10lb nano kits for sale in the for sale section along with all my other nitrous parts since I'm going with a turbo setup.

what else did you have on the TBSS

electric fans
cai
SW headers
custom ypipe
stock catback
electric cutout
UD pulley
baby cam(didn't lope)
I6 tq converter
drag radials

My best pass was with a real base tune, shifting at 6100 instead of 6500 because of the shorter drag radials and shift points being off, and having my nitrous kick off around the 1100 mark. Also was running in some heat so I know it had A LOT more left in it.

OK, so with this kit, you don't need a bottle heater right? And also, do you have to refill the nitrogen bottle too??

OK, so with this kit, you don't need a bottle heater right? And also, do you have to refill the nitrogen bottle too??

correct...you do not need a heater with this system, you will also need to fill the NANO bottle.

It can be filled at any paintball, Scuba, or SCBA re-filler.

how much do refills cost?

in this area, it would run ~$10

how long would the bottles last?

The little bottle you can fill with high pressure air or nitrogen, costs $4 here. They last the exact length as the nitrous bottle, so you just fill them when you fill the nitrous bottle.

electric fans
cai
SW headers
custom ypipe
stock catback
electric cutout
UD pulley
baby cam(didn't lope)
I6 tq converter
drag radials

My best pass was with a real base tune, shifting at 6100 instead of 6500 because of the shorter drag radials and shift points being off, and having my nitrous kick off around the 1100 mark. Also was running in some heat so I know it had A LOT more left in it.

nice setup...how did you like that I6 converter...
I just picked up a yank3200 for mine....then its going to be time to hit the track and get a few n2o runs...

I loved it actually, I do A LOT of racing on the street, and with drag radials it would dead hook on the spray, and on motor and street tires it would dead hook. Perfect for a consistent setup, plus I got it dirt cheap.

http://media.putfile.com/Skinnies-TBSS-memory

Anybody make a homemade kit? LMK
I forget off the top of my head who has it, but theres a fake nitrous kit out there, all it does is purge, and in the descrption it said that some people use it as a cheap dry shot kit. I wondered if with the proper fittings, it would work the same?

http://www.youtube.com/watch?v=3DPlEGO4E_o

:eek: f***in awesome car:bow: :cool:

bringing back an old thread. So does the compresssed air/nitrogen get sprayed into your motor too?

bringing back an old thread. So does the compresssed air/nitrogen get sprayed into your motor too?


not unless the nitrous bottle is run empty...but even if that happens it would not cause any problems.

But the high pressure air is pushing the liquid nitrous out of the bottle