ZL1modified
08-19-2007, 08:15 PM
FOR SALE
1997 CAMARO Z28, t-tops, leather, power windows, locks, mirrors and driver seat.
BUILT TO RUN-sold AS IS!
This car has an R-title but that will not affect insurance or financing
(Who wants to MOD a clean title car anyway?)
Very strong & Fast car
49,000 original miles
ASKING $6,600 OBO
MODIFICATION LIST:
CHASSIS
Spohn lower control arms w/relocation brackets
UMI adjustable torque arm w/driveshaft safety loop
UMI bolt-on sub frame connectors
ENGINE
Asp 23% under drive pulley kit
Comp ProMag 1.6mm NSA roller rockers
7.200” chromoly pushrods
GM LT4 valve springs
GMMP guide plates
160* thermostat
CSR electric water pump
Moroso cold air intake w/K&N filter
EXHAUST
Pacesetter ceramic coated long tube headers 1 ¾” primaries
Pacesetter off-road y-pipe
SLP LoudMouth 1 cat-back exhaust
DRIVETRAIN
Race built 4L60E transmission (2k stall)
Inland high strength aluminum drive shaft
3:42 limited slip differential
LS1 front brake conversion (better stopping)
COMPUTER
Performance tune by MADZ28.com
MISC.
Removed AC (still have it if Buyer wanted to Reinstall it)
Removed ABS braking system (Still have ABS if you wish reinstall it)
I replaced all the seals and gasket on the Engine this past spring.
(The only thing that didn‘t get replace were the head gaskets).
The built transmission from Hodge has about 3600 miles on it.
POC: pm if interested
1997 CAMARO Z28, t-tops, leather, power windows, locks, mirrors and driver seat.
BUILT TO RUN-sold AS IS!
This car has an R-title but that will not affect insurance or financing
(Who wants to MOD a clean title car anyway?)
Very strong & Fast car
49,000 original miles
ASKING $6,600 OBO
MODIFICATION LIST:
CHASSIS
Spohn lower control arms w/relocation brackets
UMI adjustable torque arm w/driveshaft safety loop
UMI bolt-on sub frame connectors
ENGINE
Asp 23% under drive pulley kit
Comp ProMag 1.6mm NSA roller rockers
7.200” chromoly pushrods
GM LT4 valve springs
GMMP guide plates
160* thermostat
CSR electric water pump
Moroso cold air intake w/K&N filter
EXHAUST
Pacesetter ceramic coated long tube headers 1 ¾” primaries
Pacesetter off-road y-pipe
SLP LoudMouth 1 cat-back exhaust
DRIVETRAIN
Race built 4L60E transmission (2k stall)
Inland high strength aluminum drive shaft
3:42 limited slip differential
LS1 front brake conversion (better stopping)
COMPUTER
Performance tune by MADZ28.com
MISC.
Removed AC (still have it if Buyer wanted to Reinstall it)
Removed ABS braking system (Still have ABS if you wish reinstall it)
I replaced all the seals and gasket on the Engine this past spring.
(The only thing that didn‘t get replace were the head gaskets).
The built transmission from Hodge has about 3600 miles on it.
POC: pm if interested