SS RRR
08-14-2007, 10:59 PM
Just wanted to make a fresh thread for those who may have experienced this problem. On a whim I searched and found at least the Spec Stage 3+ has a problem where the shift fork comes into contact with the pressure plate when the clutch is depressed almost to the floor.
I thought it was the pilot bushing, but to my relief it was a real easy fix.
I just ground about a 1/4" deep by 1/2" long groves in the fork and it worked like a charm. There's a nice polished ring around the pressure plate now. Looks real snazzy. :rolleyes:
Thanks Spec! :death:
Here's some key words for those who search:
grind, clutch peddle to floor, spec 3+ pressure plate, noise
yadda yadda yadda
I thought it was the pilot bushing, but to my relief it was a real easy fix.
I just ground about a 1/4" deep by 1/2" long groves in the fork and it worked like a charm. There's a nice polished ring around the pressure plate now. Looks real snazzy. :rolleyes:
Thanks Spec! :death:
Here's some key words for those who search:
grind, clutch peddle to floor, spec 3+ pressure plate, noise
yadda yadda yadda