sssalah
07-23-2007, 07:51 AM
Thinking if tidying up the engine bay, the ugliest thing is the LTCC harness with the separate coil wires. Could the coil wires for each bank be grouped together in one large convoluted tube. Would bringing the different coil wires close together cause any electrical interference?
Just to clarify, I'm refering to the wires from the LTCC box to the coils and not the spark plug wires.
JodyJ
07-25-2007, 05:20 PM
I did a search and found this from bunker. I'm considering doing something like that:
http://www3.telus.net/bunker/Pics/DSCN0353.JPG
http://www3.telus.net/bunker/Pics/DSCN0354.JPG
http://www3.telus.net/bunker/Pics/DSCN0357.JPG
http://www3.telus.net/bunker/Pics/DSCN0358.JPG
http://www3.telus.net/bunker/Pics/DSCN0361.JPG
http://www3.telus.net/bunker/Pics/DSCN0362.JPG
http://www3.telus.net/bunker/Pics/DSCN0363.JPG
http://www3.telus.net/bunker/Pics/DSCN0364.JPG
http://www3.telus.net/bunker/Pics/DSCN0366.JPG
Harness:
http://www3.telus.net/bunker/tunes/DSCN0200.JPG
http://www3.telus.net/bunker/tunes/DSCN0208.JPG
http://www3.telus.net/bunker/tunes/DSCN0206.JPG
JodyJ