60 foots

can i pull better than a 2.1 sixty with my stock torque converter?

I would hope so. My best on street tires was 2.01.

well we will c. i have my new driveshaft coming on weds so i hope to race again in a few weeks. i hope i can get in 6 or7 runs in. and get my sixty foot down.

I don't see why not, people have broken the 2.0 mark on a stock converter with drag radials.

I cut a couple 1.991s on street tires with everything stock.

My old GTA would 60 foot high 1.8's to low 1.9's with BFG drag radials and the stock automatic with a 3.70 gear.

do you think i can be in the nitrous before the sixty foot mark?

A good sicty foot time depends on a great many factors, track prep being one of them... It is usually a good investment to have appropriate tires before changing other things to achieve traction. If you are pulling 2.1 sixty foot times currently, nitrous will only make it more difficult to hook up. At least initially I would wait until second gear has been pulled.

I've pulled a 1.6 on ET Streets with stock stall.

I've pulled a 1.6 on ET Streets with stock stall.


With a lot of power.

With a lot of power.

Additionally, lighter cars make-for much easier 60ft times.

WD

Additionally, lighter cars make-for much easier 60ft times.

WD

Ditto on the light part :yes: