New times in the '93

exgmguy
06-23-2007, 08:37 PM
I went to the track today. It was a bad day. :( The track was like an ice rink. I ran a best of 13.5 @ 105. My 60 ft was 2.2 with 275 Nitto drags, an automatic trans, and a stock converter. I even tried leaving at idle and it would spin as soon as any decent amount of throttle was applied. I was basically on and off the gas through the middle of 2nd gear.

Here is the breakdown:

60 ft: 2.21
1/8th et: 8.91
1/8th mph: 88.97
1/4 et: 13.57
1/4 mph: 105.14


My car also seem to fall on it's face a little when it shifts into 3rd gear. 1st and 2nd feel great. Maybe that is just how it goes with an automatic and the stock converter.
Another thing making my scratch my head is my 1/8th mph. I think 89 mph usually equals 107-108???? Either way I think if I can get to the track on a stickier day, and get a 1.9 60 foot, I should get down around a 13.0?
Am I on the right track?

smoknta
06-23-2007, 09:35 PM
Just keep practicing your launches. And get to the track on a cool day. The first 60 feet is where its at. Get that down and you'll see your ET drop dramtically.

exgmguy
06-23-2007, 09:47 PM
The car is normally pretty easy to launch. On the street, and my last outing to the track, I can floor it and go. No wheelspin at all.
A lot of people were complaining about the track prep today. Is it actually the track prep, or does the sun beating down on the starting line have more to do with it? Last time there I was getting 2.0 60 ft's on crap 235/50/16 radials. But the weather was around 70-75 degrees instead of 85 degrees.

AL SS590 M6
06-24-2007, 08:19 AM
The car is normally pretty easy to launch. On the street, and my last outing to the track, I can floor it and go. No wheelspin at all.
A lot of people were complaining about the track prep today. Is it actually the track prep, or does the sun beating down on the starting line have more to do with it? Last time there I was getting 2.0 60 ft's on crap 235/50/16 radials. But the weather was around 70-75 degrees instead of 85 degrees.

Milan or Lapeer? It sucks to go and waste your money when the track won't hook.

exgmguy
06-24-2007, 09:38 AM
It was at Lapeer. I remember Milam being slick quite a few years ago, but I have not been there lately. I also remember waiting in line all day at Milan and getting 2 or 3 runs in.

12SCNDZ
06-24-2007, 08:31 PM
Hey, did that TV corrector work for you?

Frank
CPT

marshall93z
06-24-2007, 08:42 PM
What all is done to the car?

CamaroRacing12
06-24-2007, 08:49 PM
What all is done to the car?

yea what he said

exgmguy
06-24-2007, 09:25 PM
Hey, did that TV corrector work for you?

Frank
CPT

It works great. Thanks Frank.

exgmguy
06-24-2007, 09:28 PM
SLP headers
Hooker cat-back
cut-out
BBK crank pulley
Moroso cold air kit
air foil
1.6 rockers
3.73's
Madtuner (Madz28) chip

AL SS590 M6
06-25-2007, 06:24 AM
It was at Lapeer. I remember Milam being slick quite a few years ago, but I have not been there lately. I also remember waiting in line all day at Milan and getting 2 or 3 runs in.

That's why I spend my dollars and time at Stanton.:D

exgmguy
06-25-2007, 06:07 PM
I hear Stanton hooks like a mad fisherman. It is pretty far for me though. I think i'll head up to Ubly when we get a fairly cool weekend, or when I get a converter.
105 mph should get me into the 12's, but probably not with a stock converter. If the 60 foot rule of thumb is accurate, I should be able to get it down to a 12.9-13.0 if I can 60 foot 1.9's.

AL SS590 M6
06-26-2007, 06:44 AM
I hear Stanton hooks like a mad fisherman. It is pretty far for me though. I think i'll head up to Ubly when we get a fairly cool weekend, or when I get a converter.
105 mph should get me into the 12's, but probably not with a stock converter. If the 60 foot rule of thumb is accurate, I should be able to get it down to a 12.9-13.0 if I can 60 foot 1.9's.


In 2000 when the car was lid/Loudmouth I went 12.96 on a 1.93 60' but it was in the real cool, ok cold, fall MI air on a stock converter.

marshall93z
06-26-2007, 06:29 PM
SLP headers
Hooker cat-back
cut-out
BBK crank pulley
Moroso cold air kit
air foil
1.6 rockers
3.73's
Madtuner (Madz28) chip


89 mph is hauling ASS for those mods! Is the car real light? I'll be happy with that mph CAMMED! :p

exgmguy
06-26-2007, 08:07 PM
The car is not lightened up at all. It has the basic cloth interior, power windows, etc... I did take out the spare tire. What I don't like is that it feels pretty strong in the 1/8th mile, but feels like it lays down a bit when it shifts into 3rd.
I was racing a nice built up LS1 GTO and I stopped pulling once I hit 3rd too.

Al, what were you trapping when you ran that 12.9? I think I might be able to get up to 106 if I don't have to deal with rediculous traction for 2 gears. But then on other cars I have actually dropped a couple mph when I ran slicks and dead hooked.

exgmguy
06-26-2007, 08:15 PM
Also worth noting is that I added an underdriven crank pulley, cut-out, and a MadZ28 tune (removed Hypertech chip) since my last time out. I was trapping 101-102 in the 1/4 and 86 mph in the 1/8th in much cooler weather before these parts.

AL SS590 M6
06-26-2007, 10:17 PM
The car is not lightened up at all. It has the basic cloth interior, power windows, etc... I did take out the spare tire. What I don't like is that it feels pretty strong in the 1/8th mile, but feels like it lays down a bit when it shifts into 3rd.
I was racing a nice built up LS1 GTO and I stopped pulling once I hit 3rd too.

Al, what were you trapping when you ran that 12.9? I think I might be able to get up to 106 if I don't have to deal with rediculous traction for 2 gears. But then on other cars I have actually dropped a couple mph when I ran slicks and dead hooked.


107ish

big dave
06-27-2007, 09:34 PM
89 mph seems a bit high for the mods you have. This is the same mph I normally trap with h/c. Sounds like you need a stall the pick your times up to where they should be.

rickjames343
06-28-2007, 07:59 PM
I went to the track today. It was a bad day. :( The track was like an ice rink. I ran a best of 13.5 @ 105. My 60 ft was 2.2 with 275 Nitto drags, an automatic trans, and a stock converter. I even tried leaving at idle and it would spin as soon as any decent amount of throttle was applied. I was basically on and off the gas through the middle of 2nd gear.

Here is the breakdown:

60 ft: 2.21
1/8th et: 8.91
1/8th mph: 88.97
1/4 et: 13.57
1/4 mph: 105.14


My car also seem to fall on it's face a little when it shifts into 3rd gear. 1st and 2nd feel great. Maybe that is just how it goes with an automatic and the stock converter.
Another thing making my scratch my head is my 1/8th mph. I think 89 mph usually equals 107-108???? Either way I think if I can get to the track on a stickier day, and get a 1.9 60 foot, I should get down around a 13.0?
Am I on the right track?

SLP headers
Hooker cat-back
cut-out
BBK crank pulley
Moroso cold air kit
air foil
1.6 rockers
3.73's
Madtuner (Madz28) chip



How are you only running 8.9s?? My stock 97 runs that consistently...granted you have almost 10 mph on me, but my times are in the sig.

exgmguy
06-28-2007, 11:17 PM
I was only running 8.9's because traction was non-existient. I think an 8.9 with decent traction equals a 14.0 or so. I have Nitto drags, so at any decent track I should get 1.9 60-foots instead of 2.2's.

rickjames343
06-28-2007, 11:20 PM
I was only running 8.9's because traction was non-existient. I think an 8.9 with decent traction equals a 14.0 or so. I have Nitto drags, so at any decent track I should get 1.9 60-foots instead of 2.2's.

Oooh. I see. Once you go to a better track make sure you put the new times!