Machine Shop in So Cal?

I want to build a solid LT1 but I have heard of several horror stories of shops in the area. They should be familiar with Blok-Tru and Bor-Tru.

Someone mentioned Billeo (sp?) in Santa Monica but I can't find it on the web.

I'm looking for a solid block "built to kit".

Try L&R Engines in Santa Fe Springs. http://www.lnrengine.com

They built my bottom end and are reasonably priced, very knowledgeable, quick to return calls, and answer questions. Ask for Derek and tell him Binhtri sent you. Pronounced Been-Tree =P

-B

Thanks! It's been difficult to find a good shop. Lots of average ones but I haven't found a local quality shop. I appreciate the tip.

Blown 383 - I just thought of something. It's kinda funny you recommend an engine shop, but your Sig states your engine is in a Billion pieces. :D

Blown 383 - I just thought of something. It's kinda funny you recommend an engine shop, but your Sig states your engine is in a Billion pieces. :D

Like the sig says....the car is in ONE billion pieces however the kick ass stroker motor is just fine sitting on the engine stand. :bow:

-B

LOL... the way I read the sig, it sounded like the engine was in a billion pieces which meant both the car and the stand. I see your point.

Their website has a few pages missing. I called them and they have a block for $725 that has been torque plate honed, Blok-Tru, Bore-Ture, and I'm upping for a splayed 4-bolt... all with cam bearings and freeze plugs installed. Seemed like a good group to talk to. They have a Scat Rotating Assembly (forged) for $1300 which is dirt cheap compared to other quotes.

Try L&R Engines in Santa Fe Springs. http://www.lnrengine.com

They built my bottom end and are reasonably priced, very knowledgeable, quick to return calls, and answer questions. Ask for Derek and tell him Binhtri sent you. Pronounced Been-Tree =P

-B

Derek is also one of my customers at Manley. :thumb:

I'm running Manley pushrods in my LT1 now. They've been very good to me. I'm thinking of picking up some valves when I get this project going after Summer.