mdenz3
04-08-2007, 10:47 PM
I did a search and found nothing, so...
Is it possible to use the stock injectors out of a 3800 series II supercharged engine in a LT1? My plan was to get two cheap sets off ebay, then use the Injector flow bench that i have to pick out the 8 best and matched flowing ones and use them. I know they are rated at 36lb stock, but i've read they flow 33lbs.
transAMdriv3r
04-09-2007, 03:07 PM
A book at my work says the only injectors that will work for the lt1 are part number 17124248
which are on camaros, firebirds, roadmasters, caprice, corvette ,caddilac fleetwood broughm
turnin20s
04-09-2007, 06:53 PM
A book at my work says the only injectors that will work for the lt1 are part number 17124248
which are on camaros, firebirds, roadmasters, caprice, corvette ,caddilac fleetwood broughm
Thats more than likely wrong IMO I may not be right, but you can use ford injectors and LSX injectors and pretty much any high impendance injector.
I have a set of holley 36# sitting here that I will be using.
mdenz3
04-09-2007, 07:01 PM
Those are probably just the stock replacement ones....
I hate it when people post something just for the sake of posting without actaully reading or understanding the thread.
hotrod18_69
04-09-2007, 10:36 PM
Yes you can use them. Just flow them out and take the closest 8 to use..
hotrod18_69
04-09-2007, 10:37 PM
Thats more than likely wrong IMO I may not be right, but you can use ford injectors and LSX injectors and pretty much any high impendance injector.
I have a set of holley 36# sitting here that I will be using.
And yes you are right on all of the above...
mdenz3
04-09-2007, 11:16 PM
Ok thanks alot for the help hotrod18 69!