|
||
Header bolts (LT1)maybe2fast 03-29-2007, 03:50 PM http://store.summitracing.com/partdetail.asp?part=ARP%2D400%2D1209&autoview=sku let me know if these are right for the aluminum LT1 head and if these are what you guys recomend. thanks seawolf06 03-29-2007, 03:59 PM I think you'll have to custom make a 12-point wrench to work on those bolts. Not impossible, but the hex head bolts might be easier. Otherwise those look correct. 6SpdLT1Z 03-29-2007, 05:13 PM I went with Stage 8 Locking 1" maybe2fast 03-29-2007, 06:43 PM but 1" is needed? 6SpdLT1Z 03-29-2007, 06:48 PM but 1" is needed? depends on the flange thickness.... anything 3/8" or thicker needs 1" IIRC. 2000GTP 03-29-2007, 06:49 PM depends on the flange thickness.... anything 3/8" or thicker needs 1" IIRC. I agree, the flanges on the Pacesetters are kind of thick. I originally had 3/4 inch ARP header bolts but they just didn't feel like they had enough bite so I swapped them for 1" bolts instead. danhr 03-29-2007, 06:54 PM I think you'll have to custom make a 12-point wrench to work on those bolts. Not impossible, but the hex head bolts might be easier. Otherwise those look correct. how do you figure? I got my breslin's in with a 12 point wrench no problem. They were actually a lot easier then the 6 points, because I could make a longer rotation. | ||