dist0rtion_69
03-28-2007, 02:40 PM
I am listing this for a friend, who does not post on the boards, but works with me:
Black 1996 SS Camaro - 68,000 original miles - In average condition for a 10 year old car.. chips, some scratches, maybe a ding or two, but overall presents well at a 7/10 or so. It is located around Atlanta, GA.
Engine:
383 Stroker - ~8.5:1 compression
Venolia forged pistons
Eagle H Beam ESP Rods
Lunati Forged Stroker Crank
Splayed 4 bolt mains
Ported stock heads w/ 1.6 roller rockers
Reid 228/238 .544 112lsa cam
Fueling/Ignition:
16 volt ignition
Complete fast setup w/ crank trigger...
83# injectors
1/2" fuel lines
Weldon Fuel Pump
Modified Factory Rails
5 Gallon fuel cell
Drivetrain:
Sid Neil TH400 - Reverse Manual Valvebody, Transbrake,
Art Carr 3500 stall (stalls up to about 4000)
3" Steel Driveshaft
9" Rearend w/ spool and 3.70 gears
Wheels/Tires:
Weld Draglites
28x10 Drags
15x3.5 Front Runners
Chassis:
PA Tubular K-member
Random Technology short torque arm
Strange lightweight drag brakes
1 Corbeau Racing Seat
6 point cage (will need more to legally run)
Aftermarket gauges.. boost, water, voltage, and oil
Manual Rack
Induction:
PT-88
Air to Air Intercooler
Atlanta Chassis & Dyno Custom Turbo setup (Brad Brand/Ronnie)
Exhaust: 4" exhaust, exits by transmission
Cooling:
Meziere Electric Water Pump
Aluminum Radiator (custom for turbo setup)
Electric Fans
20lbs of boost it dyno'd 815rwhp on 116 octane
The car was just completed, and has only made shakedown passes. It did 9.24 @ 153 on 20lbs at a 1.5 60' launching of the footbrake. This is an 8 second ride launching, and a deep 8 second ride on kill.
The car also includes a 8x16 car carrier trailer w/ brand new tires. It also has a Honda Generator to crank the car, as it has no alternator.
It's nearly impossible to list every mod on the car, as there are so many. It would cost ~40k-50k to replicate easy. It is a race car, and has easy 8 second potential launching on the transbrake. If you have any questions on the car such as specific model #'s, or any general inquiry, shoot me an email and I will do my best to answer. You can also call Atlanta Chassis Dyno for any details at 770-786-2400. Ask for Brad or Ronnie. The car belongs to Billy, and they will know it.
Pics of the car are in the works.. most of his pics were with an analog camera, not a digital So I am in the works of having them converted.
$20k FIRM
Black 1996 SS Camaro - 68,000 original miles - In average condition for a 10 year old car.. chips, some scratches, maybe a ding or two, but overall presents well at a 7/10 or so. It is located around Atlanta, GA.
Engine:
383 Stroker - ~8.5:1 compression
Venolia forged pistons
Eagle H Beam ESP Rods
Lunati Forged Stroker Crank
Splayed 4 bolt mains
Ported stock heads w/ 1.6 roller rockers
Reid 228/238 .544 112lsa cam
Fueling/Ignition:
16 volt ignition
Complete fast setup w/ crank trigger...
83# injectors
1/2" fuel lines
Weldon Fuel Pump
Modified Factory Rails
5 Gallon fuel cell
Drivetrain:
Sid Neil TH400 - Reverse Manual Valvebody, Transbrake,
Art Carr 3500 stall (stalls up to about 4000)
3" Steel Driveshaft
9" Rearend w/ spool and 3.70 gears
Wheels/Tires:
Weld Draglites
28x10 Drags
15x3.5 Front Runners
Chassis:
PA Tubular K-member
Random Technology short torque arm
Strange lightweight drag brakes
1 Corbeau Racing Seat
6 point cage (will need more to legally run)
Aftermarket gauges.. boost, water, voltage, and oil
Manual Rack
Induction:
PT-88
Air to Air Intercooler
Atlanta Chassis & Dyno Custom Turbo setup (Brad Brand/Ronnie)
Exhaust: 4" exhaust, exits by transmission
Cooling:
Meziere Electric Water Pump
Aluminum Radiator (custom for turbo setup)
Electric Fans
20lbs of boost it dyno'd 815rwhp on 116 octane
The car was just completed, and has only made shakedown passes. It did 9.24 @ 153 on 20lbs at a 1.5 60' launching of the footbrake. This is an 8 second ride launching, and a deep 8 second ride on kill.
The car also includes a 8x16 car carrier trailer w/ brand new tires. It also has a Honda Generator to crank the car, as it has no alternator.
It's nearly impossible to list every mod on the car, as there are so many. It would cost ~40k-50k to replicate easy. It is a race car, and has easy 8 second potential launching on the transbrake. If you have any questions on the car such as specific model #'s, or any general inquiry, shoot me an email and I will do my best to answer. You can also call Atlanta Chassis Dyno for any details at 770-786-2400. Ask for Brad or Ronnie. The car belongs to Billy, and they will know it.
Pics of the car are in the works.. most of his pics were with an analog camera, not a digital So I am in the works of having them converted.
$20k FIRM