What plug gap for forced induction?

Hey guys,

I was wondering what you guys are gapping your plugs at for forced induction. I was told to use NGK TR6's and to gap them at 35 thousanths. Does this sound correct?....

I have an LT1 by the way, running around 8lbs. of boost.

I run mine at .035. I think you will find that is the consensus

ok thanx a lot!

I use TR6 plugs gapped at .035" also.

yup...ngk tr6 at .035"....work like a charm :cool:

Stock heat range autolites at .045 but I'm using a delteq distributorless ignition. No aftermarket boxes.:)

Zex plug @ 0.035" gap.