FS: hardened Yukon axle shafts - brand new

These Yukon axles are 20-30% stronger than stock. I got stuck with 2 sets (4 axles total). They will ONLY work in a 1993-1997 F-body without traction control
Price is $100 per axle. Free installation if you buy a pair.

Jason
email: txdrivetrain@hotmail.com
817-300-6840 - cell

up up up

LOL, I just did a search and i STILL have these. 100 OBO each. Let me know.

txdrivetrain@hotmail.com

hey jason I have TC but I dont want it. Still no worky? What would need to be changed?

If you still have these when the time comes I might take them. As long as you put them in for me! At the same time how much would a pinion seal and gear change cost me? Mine is leaking bad and I need some 3.73's or better.

hey jason I have TC but I dont want it. Still no worky? What would need to be changed?

In your case, these axles will be fine. The only difference is that they do not have the provision for the reluctor ring. Of course, if you don't care if it doesn't work, then it will be fine. Let me know

-Jason

If you still have these when the time comes I might take them. As long as you put them in for me! At the same time how much would a pinion seal and gear change cost me? Mine is leaking bad and I need some 3.73's or better.

I'll do brand new GM 3.73s installed, with a new seal, fluid, and basic install kit, and the axles w/ new axle bearings all for $625 out the door. Let me know

Jason

Dude... wtf have you been? :lol: I'd take these on a buddy discount. haha

I'll do brand new GM 3.73s installed, with a new seal, fluid, and basic install kit, and the axles w/ new axle bearings all for $625 out the door. Let me know

Jason

How much stronger would this rearend be over my stock? I am going to be putting around 350 rwhp down now, should I be looking at something else? It won't be a racecar really, it will putter around town mostly.

Dude... wtf have you been? :lol: I'd take these on a buddy discount. haha

I haven't gone anywhere, lol. You been in Iraq and whatnot :D
Guess youre back now, right?

Jason

Dude... wtf have you been? :lol: I'd take these on a buddy discount. haha

How much stronger would this rearend be over my stock? I am going to be putting around 350 rwhp down now, should I be looking at something else? It won't be a racecar really, it will putter around town mostly.

The axles are 20-30% stronger than stock. The rear will hold up fine for street driving with that power. Now if you went to the track doing 6000RPM launches, then it would be a different story :D
The only onther thing you might think about getting is a stud girdle. You can probably find a used one for $75-100, or they are about 160-180 new. Just call whenever you are ready 817-300-6840

-Jason

Ya I'm home bro.

Those axles much better than the strange or moser after markets?

Ya I'm home bro.

Those axles much better than the strange or moser after markets?
Theyre basically the same