N2O Tech Discussion for the use of Nitrous Oxide

new best time for 2.73 car!

Thread Tools
 
Search this Thread
 
Old Dec 7, 2006 | 11:35 PM
  #1  
Soccerbum21's Avatar
Thread Starter
Registered User
 
Joined: Oct 2003
Posts: 261
From: Statesboro/McDonough, GA
Cool new best time for 2.73 car!

R/T: .089
60: 1.571
330: 4.820
1/8: 7.524
mph: 90.87
1000: 9.093
1/4: 11.938
mph: 110.87


120 shot, ET streets, stock motor, moroso intake, straight pipe exhaust, 2.73 gears, stock trans with B&M shift kit.
Old Dec 7, 2006 | 11:35 PM
  #2  
Klypto's Avatar
Registered User
 
Joined: May 2002
Posts: 1,418
From: New Orleans, LA
nice
Old Dec 7, 2006 | 11:47 PM
  #3  
subobo0411's Avatar
Registered User
 
Joined: Mar 2005
Posts: 46
From: Orland Park, IL
thats pretty good, gotta updata the sig now
Old Dec 8, 2006 | 12:38 AM
  #4  
Soccerbum21's Avatar
Thread Starter
Registered User
 
Joined: Oct 2003
Posts: 261
From: Statesboro/McDonough, GA
pics, 13.9 is the motor pass from earlier tonight!
Old Dec 8, 2006 | 10:38 AM
  #5  
2000GTP's Avatar
Registered User
 
Joined: Mar 2005
Posts: 12,312
From: Aurora, IL
Very nice times. What kit are you running again? Those are some pretty nice sixty foot times on a stock suspension and tranny.
Old Dec 8, 2006 | 12:23 PM
  #6  
T/A lt1's Avatar
Registered User
 
Joined: Nov 2001
Posts: 1,582
From: Louisiana, USA
Nice, I always knew a 2.73 car would work really well on a little n2o but it looks like your bottle pressure was falling b/c of the mph. Good run later Clint
Old Dec 8, 2006 | 01:45 PM
  #7  
MeanGreen97Z's Avatar
Registered User
 
Joined: Aug 2000
Posts: 3,523
From: TX
Holy crap!! You picked up 2 secs and 12mph!!!!
Old Dec 8, 2006 | 02:03 PM
  #8  
Soccerbum21's Avatar
Thread Starter
Registered User
 
Joined: Oct 2003
Posts: 261
From: Statesboro/McDonough, GA
Originally Posted by 2000GTP
Very nice times. What kit are you running again? Those are some pretty nice sixty foot times on a stock suspension and tranny.


i got NX solenoids, an NOS nozzle, 53 jet nitrous, 31 jet fuel.



and as for the trap, its the third gear....


third gear goes to warp speed, 4th gear i go to plaid. (spaceballs fans know what i'm talkin about)
Old Dec 8, 2006 | 02:42 PM
  #9  
T/A lt1's Avatar
Registered User
 
Joined: Nov 2001
Posts: 1,582
From: Louisiana, USA
How much bottle pressure are you running? When you leave the line the pressure will drop all the way to the end.
Old Dec 8, 2006 | 04:30 PM
  #10  
Soccerbum21's Avatar
Thread Starter
Registered User
 
Joined: Oct 2003
Posts: 261
From: Statesboro/McDonough, GA
Originally Posted by T/A lt1
How much bottle pressure are you running? When you leave the line the pressure will drop all the way to the end.


i'm starting it out, according to the guage at the bottle, at about 1100

the jetting is a jet or so rich, so i'm not too concerned with running too much bottle pressure.


cooler full of hot water seems to do the trick to get it to temperature.


and yes, as soon as you open the solenoid, the pressure is gonna start dropping
Old Dec 8, 2006 | 05:06 PM
  #11  
Mikek340's Avatar
Registered User
 
Joined: Sep 2005
Posts: 151
Very impressive. Nice job!!!
Old Dec 12, 2006 | 11:44 AM
  #12  
byrons1502's Avatar
Registered User
 
Joined: Oct 2006
Posts: 579
From: northern indiana
that 60 foot is a** kicking cool. what for suspension do you have. that seems like the rpms would be too low to engage the nos. do you have a large stall or a progressive controller. i am impressed

you guys are lucky i live in snow hell and the track is closed before halloween
Old Dec 12, 2006 | 12:01 PM
  #13  
TransAmGT's Avatar
Registered User
 
Joined: Apr 2002
Posts: 694
From: Milledgeville, Ga USA
He has a stock stall...no progressive controller...not even a window switch.

Just a WOT switch spraying right off the line that's where the 1.55 60ft comes from

It's a fun car to drive...you wouldn't think a 2:73 car could pull these times!

I'm his roomate he/we have been nipping at the heals of 11's for a while now! Glad he finally made it!
Old Dec 12, 2006 | 12:40 PM
  #14  
Soccerbum21's Avatar
Thread Starter
Registered User
 
Joined: Oct 2003
Posts: 261
From: Statesboro/McDonough, GA
yayah
Old Dec 12, 2006 | 04:04 PM
  #15  
1SlowFormula's Avatar
Registered User
 
Joined: Nov 2003
Posts: 1,756
From: West Linn, OR
That time rocks, Congrats... I have been wondering what N20 would do to my times. But I guess we'll have to wait a while and see.



All times are GMT -5. The time now is 05:43 AM.