taner
09-24-2006, 07:57 PM
http://uploadfile.putfile.com/videos/26512404523.wmv
right click and save, you know the routine!
thanks to Bad95 for hosting it!
right click and save, you know the routine!
thanks to Bad95 for hosting it!
|
||
9.33 video is uptaner 09-24-2006, 07:57 PM http://uploadfile.putfile.com/videos/26512404523.wmv right click and save, you know the routine! thanks to Bad95 for hosting it! myslowcamaro 09-24-2006, 08:39 PM very nice run Capn Pete 09-24-2006, 09:17 PM Boo, you lost!!! :p ;) Ah heck, still a good run!!! :thumb: Grease 09-24-2006, 10:08 PM Good run:thumb: You looked a little squirrley around the 8th mile on that run. taner 09-25-2006, 08:40 PM lol, well i lost to a 632 ci big block, with 2 stage fogger system on it. i don't feel to bad. twistedwedge 09-27-2006, 05:48 PM nice run man, and nice driving! That thing has got to be a handful-you were all over the place at the end of the track. taner 09-27-2006, 10:59 PM i spin the tires every time i shift! makes for a really fun ride :) 95Bird 09-27-2006, 11:44 PM great run man. can't wait for you to go even faster. Love the way it leaves..thats what I'm going for. Dave '97 Z28 M6 09-28-2006, 01:25 AM I wish I had known you were gonna be there Taner... I was at that track on the Friday night before your run. According to the BMR site, you're running 4.10s in the 9". What sort of crazy RPM are you at when you go through the traps??? taner 09-28-2006, 06:58 AM some of that info needs updating on the site :) Dave '97 Z28 M6 09-29-2006, 11:05 AM Well... Making a few assumptions here: if you are running 4.10s, crossing the line in 4th (video shows that), and running a 28" tire... you'd be turning 7300RPM at 148MPH. That's do-able with your big cam - solid roller motor, but I'd suspect you might be running a 3.90 ratio, or maybe even 3.73. taner 10-04-2006, 06:02 PM Well... Making a few assumptions here: if you are running 4.10s, crossing the line in 4th (video shows that), and running a 28" tire... you'd be turning 7300RPM at 148MPH. That's do-able with your big cam - solid roller motor, but I'd suspect you might be running a 3.90 ratio, or maybe even 3.73. :cool: | ||