T/A Racer
08-02-2006, 09:04 AM
hey guys well the old clutch is finally coming out. its been in the car for 120,000 miles as far as i know. i got it at 80,000. anyways it seems like its really taken the abuse well as i am definately not an easy driver. but i havent taken it to the track or used slicks. anyways im thinking about just putting a stocker back in b/c of the price. so couple questions. where is the cheapest place to just get a replacement, and is there a slightly upgraded clutch for anywhere near the same place? thanks in advance for any help
Jazsun
08-02-2006, 04:28 PM
lt4 clutch kit from autozone probably...little better then stock. tell them to look up a 96 corvette.
SpeedDemon02SS
08-02-2006, 06:40 PM
the centerforce dual friction goes for 550 from summit. that would be an upgrade.
PoorMan
08-02-2006, 09:39 PM
lt4 clutch kit from autozone probably...little better then stock. tell them to look up a 96 corvette.
96 vette had a ZF6 not a T56. Same clutch? Not sure, but doubt it.
Bow94z
08-02-2006, 10:48 PM
If SLP still sold their kit i'd tell u to go for that
RAM clutches are pretty decently priced too
SSCamaro
08-03-2006, 10:25 PM
listen to "Jazsun" and learn, or me of course because I did it in my 97SS. When finished, it felt better than stock cause it took away my 90mph vibration, and so it was.........
Unfortionatly I dont have the part numbers, sorry...
T/A Racer
08-04-2006, 09:08 AM
ok so lets get this straight. if i were to buy a clutch kit for a 96 corvette, this would provide me with an LT4 clutch that would work in my 95 transam which is a slightly better upgrade from stock? its about 60$ difference in price. is the improvement worth it? thanks for all your help guys
97FormulaWS-6
08-04-2006, 10:08 AM
Don't know what they are offering for that clutch for the '96 Vette.
I do know that if you buy the LT4 pressure plate, I have an un-used disk that I got from SLP back when they were still selling their clutch kit that I'm looking to sell for like $50.
It's still in the thermal-packaging from SLP; I bought it as a replacement disk to replace the smoked one I did, but am going with a ST instead.
Jazsun
08-06-2006, 10:29 PM
Im not positive about hte 96 vette thing, but that was what I heard in another thread. Just ask for the vette clutch kit which is the same year as your car. Should have an LT4 pressureplat w/ lt4 square t/o bearing and new clutch disk.