Where to find TPI wiring harness?

robvas
06-09-2006, 01:14 PM
To make a long story short, a friend of mine had a 1987 Formula Firebird. We pulled the engine (bearings were shot) but never put another one back in. He removed the wiring harness and threw it away. A few years later, he gave the car to my cousin for free. My cousin is trying to put the car back togther and would like to keep the TPI (L98 car), but can't do it without the wiring.

Where can he get a wiring harness that won't cost an arm and a leg?

sparafucile17
06-09-2006, 04:44 PM
Painless Wiring would be the best bet. Check out their catalog at:

http://www.painlesswiring.com/webcatalog.php

P/N 60102 and cost is $325 from Summit.
I don't know if you're gonna find a cheaper all-in-one solution than this.

Jeff

1987IROC350
06-12-2006, 02:30 AM
http://hawksthirdgenparts.com/camaro_parts

Tex95Z
06-13-2006, 04:02 PM
These guys are right, painless is cheapest way to go, unless you go to a junkyard (isnt there one called Kings in your area?). I spent alot 1300.00 on a custom harness for mine.

LS1Z28
06-14-2006, 01:39 PM
http://www.tpiparts.net/discontinued_parts