End link

Hello,

I have a quick and stupid question (I did try searching first). My G/F's '94 camaro (V6) appears to have broken a rear anti-sway-bar end-link. I have been unsuccessful in locating one online at a local parts store. Does anyone have a part number (I looked on E.S.'s site and did not explicitly see a part number listed) or know of a parts store chain that carries the end link?

Thanks folks!

Just go to the parts store and ask them if they have them, if not they can get them within a day.

I live in a town of 1000 people and my local parts store had them on hand when i needed them.

Go to rockauto.com. They have Moog endlinks for our cars. You want Moog p/n K6678.

Autozone has them.

Thanks guys. :nice: I'll call the local parts houses (just been too busy lately, but I'm online at 2 am) and see what they show. If AZ has them, great! If not, I'll go the RA route that Bud mentioned.

I had seen an E.S. part number posted in here: 9.8105G. Does anyone know if that works (in case the parts store has those on the shelf)?

Thanks again!

If you go ES or Prothane, get 4" endlinks (4" between chassis mount and swaybar) for a stock height car.

I just wanted to pop back in and thank you guys. I ended up just getting an end-link at CSK for 5 bucks (they have a HD version for 9 or 10 beans, for future searchers). At some point I'll redo both sides in poly, hence the cheap version for now.

It took a couple minutes to grind out the [old corroded] link's shank but otherwise went smooth and quick.

Anyhow, point was to thank you again - the info was much appreciated. :nice: