lucky19
02-22-2006, 11:25 AM
I have recently bought a dis 4 box. I'm the second owner and the harnees came already wired. The guy I bought it from had a 3.4, mine is a 3.8. The question I have is the #2 interface doesnt seem to be passing any fire thus the missfiring. I took the tape off to see if every thing was hooked up right. I also used this diagram for help. http://www.angelfire.com/ok5/tiago/MSD.html
It looked right and I used a meter to see if current would pass and it did. How can I find out if its bad? Or any help fixing it would be appreciated. One other question: the red and black wires coming out of the box, I grounded the black and touched the red one to my posi side of the bat and the light doesnt turn on. Is that how is suppose to be wired???
It looked right and I used a meter to see if current would pass and it did. How can I find out if its bad? Or any help fixing it would be appreciated. One other question: the red and black wires coming out of the box, I grounded the black and touched the red one to my posi side of the bat and the light doesnt turn on. Is that how is suppose to be wired???