95 camaro 3.4 V6 Cold Air Intake

I have a 95 3.4 camaro.I am thinking about getting this cold air intake off of ebay.http://cgi.ebay.com/ebaymotors/Camaro-Firebird-3-4-V6-Cold-Air-Intake-93-95-K-N-Filt_W0QQitemZ8040539735QQcategoryZ38634QQrdZ1QQcm dZViewItemI was wondering if this is any good and how hard it is to install.Any help will be greatly helpful thank you

nah I wouldn't waste your money on the cheap ****

Get a name brand.

Quite frankly, as sh!tty as the 3.4L head and intake flow are, it won't help much unless you addressed those two issues....but I've heard of folks building their own intakes from Home Depot parts (not at all a bad thing), so cost evidently isn't such a big deal.

For the love of F-bodies, do not try to build one. I know I'll catch some flak from some who have but just spend $100 and get a real one.

Thank you all for your help. Now about the head and intake flow problem what will i need to do to fix that.Thank you. Or would i be better off to just get a new engine

Thank you all for your help. Now about the head and intake flow problem what will i need to do to fix that.Thank you. Or would i be better off to just get a new engine

I got a set of headers for sale.

I made a homemade one for 60 dollars all together and it does wonderfully...and for the head and intake flow problem, there is a lot of work that would needed to be done to get that corrected...

Thank you all for your help. Now about the head and intake flow problem what will i need to do to fix that.Thank you. Or would i be better off to just get a new engine
you need a upgraded intake and heads or port and polish what ya got.

Buy The K&n Fipk Its 100 Times Better Than That Aluminum **** Especially Since Aluminum Gets Hot. And The K&n Kit Fits Perfectly.

if you want one of those that was originally referred to, I took mine off when I bought my camaro.

Nevermind...that POS is going in the trash. Stick with the K&N or SLP IMO.