dyno numbers!!!

all motor: 266.6 max power 304.3 max torque

with 75 shot: 355.6 486.7 max torue

a dynojet was used.

and by the way i did three pulls first with cutout open and it was 262. 5 and 297.1

the second with cut out closed 266.6 and 304.3

the third on the spray with cut out closed
so needless to say loud is not power.

Hmmm. Nice #s. What n20 setup are you running?
They must have sprayed it at like 2000-2500 rpms because mine stock on 150 shot made 510tq at just over 3k.

im using a nx kit wit jet sizes 43 and 26.

i was surprized too about the torque. i going to post my dyno sheets so i dont get bs called on me. and by the way it was at 3200 when he punched
it speed omemter was around 60-65 cant really remeber.

I made 523.8 lbs/tq at 3700 and 416.9 hp at 5200 on a 150 wet shot....shot it at 3000 rpm....if i knew how to post my graph i would show you...but i dont know how to link it...